|
| From: | Niamathullah sharief |
| Subject: | Re: [Ltib] LTIB is showing error |
| Date: | Thu, 24 Dec 2009 14:42:58 +0530 |
Hi Sharief,
These files have not been published by Freescale, so that's why you get this error (they really are not on the GPP).
As I said before mount the iso image you downloaded and you should find these files on there under the pkgs directory. If they are there, copy the missing files to /opt/freesscale/pkgs. If they are not on the ISO image, you need to contact Freescale and ask them to supply the missing files.
Regards, Stuart
Niamathullah sharief wrote:
Still i am getting the same error. dont know what to do. Kindly help me
On Wed, Dec 23, 2009 at 7:24 PM, Niamathullah sharief <address@hidden <mailto:address@hidden>> wrote:
Actually it works when i give "./ltib". It is showing the
configuration window. After configuration it runs and showing some
error in one function. I dont know how to fix that. The error is
address@hidden:~/Desktop/plugins/L2.6.28_4.5.1_SDK_Aug2009_source/ltib$
./ltib -c**
*
*+ '[' -n '' ']'**
*
*+ '[' -f
/home/ariem/Desktop/plugins/L2.6.28_4.5.1_SDK_Aug2009_source/ltib/config/.config
']'**
*
*+ cat
/home/ariem/Desktop/plugins/L2.6.28_4.5.1_SDK_Aug2009_source/ltib/config/.config**
*
*+ perl -ne 'print if m,^CONFIG_(?!PCF),'**
*
*+ '[' '!' -f config/platform/imx/.config -a -f
config/platform/imx/defconfig ']'**
*
*+ '[' -n '' ']'**
*
*+ cd config/platform/imx**
*
*+ mconf main.lkc .config**
*
*../../userspace/packages.lkc:1677:warning: enable is only
allowed with boolean and tristate symbols**
*
*../../userspace/packages.lkc:3205:warning: enable is only
allowed with boolean and tristate symbols**
*
*
*
*
*
**** End of configuration.**
*
**** Check the top-level Makefile for additional configuration
options.**
*
*
*
*+ cp .config defconfig.dev**
*
*
*
*Processing platform: Freescale iMX51 Based Boards**
*
*===================================================**
*
*using config/platform/imx/.config**
*
*SYSCFG_RAM_DIRS has changed, sysconfig-mx needs a rebuild**
*
*
*
*Processing: fake-provides**
*
*===========================**
*
*
*
*Processing: u-boot**
*
*====================**
*
*Build path taken because: no prebuilt rpm, **
*
*Testing network connectivity**
*
*OK GPP: **
*
*
*
*Try u-boot-v2009.01-imx_4.5.1.tar.bz2.md5 from the GPP**
*
*http://bitshrine.org/gpp/u-boot-v2009.01-imx_4.5.1.tar.bz2.md5:**
*
*19:19:38 ERROR 404: Not Found.**
*
*Try u-boot-v2009.01-imx_4.5.1.tar.bz2 from the GPP**
*
*http://bitshrine.org/gpp/u-boot-v2009.01-imx_4.5.1.tar.bz2:**
*
*19:19:39 ERROR 404: Not Found.**
*
*Can't get: u-boot-v2009.01-imx_4.5.1.tar.bz2 at ./ltib line 790.**
*
*
*
*
*
*f_buildrpms() returned an error, exiting**
*
*traceback:**
*
* main:560**
*
*
*
*
*
*Started: Wed Dec 23 19:19:31 2009**
*
*Ended: Wed Dec 23 19:19:39 2009**
*
*Elapsed: 8 seconds**
*
*
*
*These packages failed to build:**
*
*u-boot **
*
*
*
*Build Failed**
*
*
*
*Exiting on error or interrupt**
*
address@hidden:~/Desktop/plugins/L2.6.28_4.5.1_SDK_Aug2009_source/ltib$*
What will be problem. How to rectify that?
On Wed, Dec 23, 2009 at 7:15 PM, Stuart Hughes <address@hidden<mailto:address@hidden <mailto:address@hidden>>>Those files should have been copied from the iso image you
downloaded to /opt/freescale/pkgs. When you were
"experimenting" before maybe you removed them. Re-mount the CD
and copy the stuff in pkgs to /opt/freescale/pkgs.
Niamathullah sharief wrote:
Now i got a problem by my mistake.
.ltib works fine for me. But i forget to save the
configuration while it runs. so when i try it again by
typing ./ltib i am getting some error.
This is the error
address@hidden:~/Desktop/plugins/L2.6.28_4.5.1_SDK_Aug2009_source/ltib$
./ltib **
*
*
*
*Processing platform: Freescale iMX51 Based Boards**
*
*===================================================**
*
*using config/platform/imx/.config**
*
*
*
*Processing: fake-provides**
*
*===========================**
*
*
*
*Processing: u-boot**
*
*====================**
*
*Build path taken because: no prebuilt rpm, **
*
*Testing network connectivity**
*
*OK GPP: **
*
*
*
*Try u-boot-v2009.01-imx_4.5.1.tar.bz2.md5 from the GPP**
*
*http://bitshrine.org/gpp/u-boot-v2009.01-imx_4.5.1.tar.bz2.md5:**
*
*18:46:51 ERROR 404: Not Found.**
*
*Try u-boot-v2009.01-imx_4.5.1.tar.bz2 from the GPP**
*
*http://bitshrine.org/gpp/u-boot-v2009.01-imx_4.5.1.tar.bz2:**
*
*18:46:52 ERROR 404: Not Found.**
*
*Can't get: u-boot-v2009.01-imx_4.5.1.tar.bz2 at ./ltib
line 790.**
*
*
*
*
*
*f_buildrpms() returned an error, exiting**
*
*traceback:**
*
* main:560**
*
*
*
*
*
*Started: Wed Dec 23 18:46:50 2009**
*
*Ended: Wed Dec 23 18:46:52 2009**
*
*Elapsed: 2 seconds**
*
*
*
*These packages failed to build:**
*
*u-boot **
*
*
*
*Build Failed**
*
*
*
*Exiting on error or interrupt**
*
address@hidden:~/Desktop/plugins/L2.6.28_4.5.1_SDK_Aug2009_source/ltib$*
I am very very confused
On Wed, Dec 23, 2009 at 5:56 PM, Niamathullah sharief
<address@hidden <mailto:address@hidden>
wrote:
tHE PROBLEM SOLVER AFTER I CLOSE AND OPEN THE NEW
TERMICAL. Its
working fine now
On Wed, Dec 23, 2009 at 5:40 PM, Stuart Hughes
<address@hidden <mailto:address@hidden><mailto:address@hidden <mailto:address@hidden>>> wrote:
That error message is coming from your host distro, I
don't have
that. You'll need to get help on an Ubuntu forum
unless someone
else here has seen that message before (I have not).
My guess
is you have another window with visudo open, or there
is some
other process running visudo.
Niamathullah sharief wrote:
yes i understood that and when try to open that
file by
using "sudo visudo"
address@hidden:/usr/local/etc# sudo visudo**
*
*visudo: /etc/sudoers busy, try again later**
*
address@hidden:/usr/local/etc#*
I didnt have any *.tmp file. Now i am searching
how to open
that sudoers file to add that line. can you help me
I am getting the foloowing error
visudo: busy try again later
On Wed, Dec 23, 2009 at 5:16 PM, Stuart Hughes
<address@hidden <mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>><mailto:address@hidden <mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>>>> wrote:
The error message is telling you what to do.
Please read
the error
messages and the FAQ.
Niamathullah sharief wrote:
I am using UBUNTU. I am not using debian.
Even though
i used
this command. but this time i am getting
different
error. see this
address@hidden:~/Desktop/plugins/L2.6.28_4.5.1_SDK_Aug2009_source/ltib$
./ltib **
*
*
*
*I ran the command: sudo -S -l which
returned:**
*
*
*
*[sudo] password for ariem: **
*
*
*
*This means you don't have sudo
permission to
execute rpm
commands
as root**
*
*without a password. This is needed for
this build
script to
operate
correctly.**
*
*
*
*To configure this, as root using the
command
"/usr/sbin/visudo",**
*
*and add the following line in the User
privilege
section:**
*
*
*
*ariem ALL = NOPASSWD: /usr/bin/rpm,
/opt/freescale/ltib/usr/bin/rpm**
*
*
*
*traceback:**
*
* main::check_sudo_setup:2444**
*
* main::host_checks:1401**
*
* main:542**
*
*
*
*
*
*Started: Wed Dec 23 16:02:24 2009**
*
*Ended: Wed Dec 23 16:02:26 2009**
*
*Elapsed: 2 seconds**
*
*
*
*
*
*Build Failed**
*
*
*
*Exiting on error or interrupt**
*
address@hidden:~/Desktop/plugins/L2.6.28_4.5.1_SDK_Aug2009_source/ltib$*
On Wed, Dec 23, 2009 at 3:54 PM, Stuart Hughes
<address@hidden <mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>>
<mailto:address@hidden <mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>>>
<mailto:address@hidden <mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>>
<mailto:address@hidden <mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>>>>> wrote:
There's no issue with zlib, if you look the
complaint is now
about:
rpm, rpm-build, m4 and bison. If you
install the
missing packages
you should be okay. The exact names
depend on
your distro,
it looks
like you're debian based so you need
to: sudo
apt-get install
rpm m4
bison
Niamathullah sharief wrote:
This is my output of ./ltib
address@hidden:~/Desktop/plugins/L2.6.28_4.5.1_SDK_Aug2009_source/ltib$
./ltib **
*
*
*
*ltib cannot be run because one
or more of
the host
packages
needed to run it**
*
*are either missing or out of
date or not
in ltib's
standard
path.
Please**
*
*install/upgrade these packages
on your
host. If you have
your own
utilities**
*
*in non-standard paths, please
add an entry
into the
.ltibrc file
for example:**
*
*
*
*%path_std**
*
*/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/my/own/exes**
*
*
*
*Package Minimum ver Installed
info**
*
*------- -----------
---------------**
*
*rpm 0 not installed**
*
*rpm-build 0 not installed**
*
*m4 0 not installed**
*
*bison 0 not installed**
*
*
*
*Died at ./ltib line 1397.**
*
*traceback:**
*
* main::host_checks:1397**
*
* main:542**
*
*
*
*
*
*Started: Wed Dec 23 15:42:57 2009**
*
*Ended: Wed Dec 23 15:42:59 2009**
*
*Elapsed: 2 seconds**
*
*
*
*
*
*Build Failed**
*
*
*
*Exiting on error or interrupt**
*
address@hidden:~/Desktop/plugins/L2.6.28_4.5.1_SDK_Aug2009_source/ltib$
**
*
*
*
| [Prev in Thread] | Current Thread | [Next in Thread] |