[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Ltib] Install Dillo problem

From: Vic
Subject: [Ltib] Install Dillo problem
Date: Thu, 30 Sep 2010 03:57:29 -0700

I'm new to Linux and just bought an EA LPC3250. I finished the "Getting Started with Linux on the LPC3250 OEM board" guide and had a successful build using the default configuration but only when I use instead of the 2.6.34 kernel. My objective is to run a Web browser and so I selected dillo from the LTIB configuration package list. When I run ./ltib, it failed on libXrender as seen below. and even if I deselect dillo, the libXrender error stays.
1. How do recover from this? It seems the compilation messages have enough info to tell me what exactly is causing the issue.
2. What and Where is the file that has the environment settings? The guide mentioned about configuration settings such as CONFIG_NET and CONFIG_LPC32XX_MII but didnt mention where they are set.
Any help shall be very much appreciated.
here's the trail
checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking for arm-linux-pkg-config... no
checking for pkg-config... /opt/ltib/usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for X... configure: error: Package requirements (x11) were not met:
No package 'x11' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables X_CFLAGS
and X_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
error: Bad exit status from /home/user/ltib/tmp/rpm-tmp.60081 (%build)

RPM build errors:
    Bad exit status from /home/user/ltib/tmp/rpm-tmp.60081 (%build)
Build time for libXrender: 16 seconds
Failed building libXrender

f_buildrpms() returned an error, exiting

Started: Thu Sep 30 02:37:46 2010
Ended:   Thu Sep 30 02:41:40 2010
Elapsed: 234 seconds
VERSION          : 10.1.1
CVS_VERSION      : $Revision: 1.71 $ (Savannah)
PLATFORM         : ea3250
GNUTARCH         : arm
TOOLCHAIN        : tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm
TOOLCHAIN_CFLAGS : -O2 -fsigned-char -mfloat-abi=softfp -mfpu=vfp
These packages failed to build:
Build Failed
Exiting on error or interrupt

reply via email to

[Prev in Thread] Current Thread [Next in Thread]