[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Ltib] Re: Install Dillo Problem

From: Vic
Subject: [Ltib] Re: Install Dillo Problem
Date: Tue, 5 Oct 2010 01:28:03 -0700


Ok, Just want to confirmto avoid any mistakes. I can't successfully compile in 2.6.34 and so I renamed the /BUILD/ instead. It doesnt have to be on 2.6.34,right?

Then the X11 source that I have to install in ubuntu 9.04 MUST to be 7.3,right?
Then I should apply your display patch on kmode.c,right?


----- Original Message ----- From: "Kevin Wells" <address@hidden>
To: "Vic" <address@hidden>; <address@hidden>
Sent: Monday, October 04, 2010 9:56 AM
Subject: RE: Install Dillo Problem

Hi Vic,

You'll need to do a 'cvs up' in your ltib directory to get
the changes. You should also rename or delete the
linux-2.6.34 directory in ./rpm/BUILD so the changes will
be correctly installed.

The easiest way to install the X11 changes is to install the
Xorg-server source and then manually apply the changes to
the file.

Rebuild all and you should be ok. Install a USB mouse into
the USB host port, boot your board to Linux, and then....

Xfbdev -mouse mouse &
export DISPLAY=localhost:0.0
dillo &

It worked great over here, but the rendering has problems on
some pages with some large blank regions. You might be able
to get some tuning info from Dillo's website. The performance
was quite good.


-----Original Message-----
From: Vic [mailto:address@hidden
Sent: Sunday, October 03, 2010 8:24 PM
To: address@hidden
Cc: Kevin Wells
Subject: Re: Install Dillo Problem

Hi Kevin,

How do I update the SVN code and install the X11 patch?


reply via email to

[Prev in Thread] Current Thread [Next in Thread]