Oh oh, is that so? Unfortunately, the corrective patches made by Kevin to make Dillo run properly only works in 2.6.34.
I believe this is a known issue with 2.6.34 on the LPC32xx family. In all of my testing, I've simply stayed back at 18.104.22.168.
----- "Vic" wrote:
> Hi Kevin, > > Now able to successfully compile 2.6.34 but when I boot the kernel > it's > unable to configure eth0 as below. Booting with 22.214.171.124 remains fine > using > same configuration. I'm using nfs mounted root file system. > > ... > TCP cubic registered > NET: Registered protocol family 17 > ssp-pl022 dev:ssp0: ARM PL022 driver, device ID: 0x00041022 > pl022: mapped registers from 0x20084000 to c4882000 > ads7846 spi0.0: touchscreen, irq 64 > input: ADS7846 Touchscreen as /class/input/input0 > CLCD: Embedded Artists 3.2 inch LCD hardware, QVGA portrait display > Console: switching to colour frame buffer device 30x40 > VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev > 1 > rtc-lpc32xx rtc-lpc32xx: setting system clock to 2059-04-12 10:56:18 > UTC > (2817370578) > IP-Config: Failed to open eth0 > IP-Config: No network devices available. > Looking up port of RPC 100003/2 on 192.168.1.6 > rpcbind: server 192.168.1.6 not responding, timed out > Root-NFS: Unable to get nfsd port number from server, using default > Looking up port of RPC 100005/1 on 192.168.1.6 > rpcbind: server 192.168.1.6 not responding, timed out > Root-NFS: Unable to get mountd port number from server, using default > Root-NFS: Server returned error -101 while mounting > /home/user/ltib/rootfs > VFS: Unable to mount root fs via NFS, trying floppy. > VFS: Cannot open root device "nfs" or unknown-block(2,0) > Please append a correct "root=" boot option; here are the available > partitions: > 1f00 3200 mtdblock0 (driver?) > 1f01 12800 mtdblock1 (driver?) > 1f02 256 mtdblock2 (driver?) > 1f03 4096 mtdblock3 (driver?) > 1f04 110720 mtdblock4 (driver?) > Kernel panic - not syncing: VFS: Unable to mount root fs on > unknown-block(2,0) > Backtrace: >  (dump_backtrace+0x0/0x108) from  > (dump_stack+0x18/0x1c) > r6:00000000 r5:c3c9a017 r4:c3c19f60 >  (dump_stack+0x0/0x1c) from  > (panic+0x5c/0xf8) >  (panic+0x0/0xf8) from  > (mount_block_root+0x1d4/0x21c) > r3:00000000 r2:c3c18000 r1:c3c19f60 r0:c0356d6c >  (mount_block_root+0x0/0x21c) from  > (mount_root+0xc4/0xfc) >  (mount_root+0x0/0xfc) from  > (prepare_namespace+0x170/0x1d4) > r5:c0022a08 r4:c03cb278 >  (prepare_namespace+0x0/0x1d4) from  > (kernel_init+0x11c/0x160) > r5:00000000 r4:c03cb058 >  (kernel_init+0x0/0x160) from  > (do_exit+0x0/0x684) > r4:00000000 > > Regards, > Vic > > > ----- Original Message ----- > From: "Vic" > To: "Kevin Wells" > Cc: "ltib mail" > Sent: Thursday, October 07, 2010 9:49 PM > Subject: Re: Problem using 2.6.34 in EA 3250 > > > > Hi Kevin, > > > > Question is, why only in 2.6.34? I'm fine compiling with 126.96.36.199. > They > > are both in GPP, right? It has always been my issue from the start. > it > > always get stuck in this file. Apparently the url in the installer > script > > > URL:http://bitshrine.org/gpp/tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm.md5 > > > is no longer a valid location. > > Is there any other place I can manually retrieve the file? > > > > Thanks, > > Vic > > > > > > > > > > ----- Original Message ----- > > From: "Kevin Wells" > > To: "Vic" ; > > Sent: Thursday, October 07, 2010 6:10 PM > > Subject: RE: Problem using 2.6.34 in EA 3250 > > > > > > Hi Vic, > > > >> ERROR: md5sum mismatch, re-naming > /opt/ltib/pkgs/linux-2.6.34.tar.bz2 to > >> /opt/ltib/pkgs/linux-2.6.34.tar.bz2.bad, please re-try > > > > It looks like some of your files in the ./opt/ltib/pkgs > > directory are corrupt or incomplete. When you see these > > messages, you can try to delete the files in that directory > > with the similar names and try again, but it might be an > > indication your network is having problems fetching them. > > > > Kevin > > > > > >> -----Original Message----- > >> From: Vic [mailto:address@hidden > >> Sent: Thursday, October 07, 2010 8:33 PM > >> To: address@hidden > >> Cc: Kevin Wells > >> Subject: Re: Problem using 2.6.34 in EA 3250 > >> > >> Hi Kevin, > >> > >> I think there is basic problem with installing 2.6.34 from the > error > >> trace > >> I'm getting. It keeps on referring to a mismatch as follows. > >> ... > >> Processing: kernel-2.6.34-lpc32xx > >> =================================== > >> Build path taken because: no prebuilt rpm, > >> Testing network connectivity for gpp > >> OK GPP: is available > >> Try linux-2.6.34.tar.bz2 from the GPP > >> ERROR: md5sum mismatch, re-naming > /opt/ltib/pkgs/linux-2.6.34.tar.bz2 to > >> /opt/ltib/pkgs/linux-2.6.34.tar.bz2.bad, please re-try > >> Can't get: linux-2.6.34.tar.bz2 at ./ltib line 802. > >> > >> > >> f_buildrpms() returned an error, exiting > >> traceback: > >> main:567 > >> > >> > >> Started: Thu Oct 7 19:55:17 2010 > >> Ended: Thu Oct 7 19:57:49 2010 > >> Elapsed: 152 seconds > >> > >> VERSION : 10.1.1 > >> CVS_VERSION : $Revision: 1.71 $ (Savannah) > >> PLATFORM : ea3250 > >> GNUTARCH : arm > >> TOOLCHAIN : tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm > >> TOOLCHAIN_CFLAGS : -O2 -fsigned-char -mfloat-abi=softfp -mfpu=vfp > >> > >> These packages failed to build: > >> kernel-2.6.34-lpc32xx > >> > >> Build Failed > >> > >> Exiting on error or interrupt > >> > >> Regards, > >> Vic > >> > >> > >> > > > > > > > > _______________________________________________ > LTIB home page: http://ltib.org > > Ltib mailing list > address@hidden > http://lists.nongnu.org/mailman/listinfo/ltib