[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Ltib] Re: Install Dillo Problem

From: Vic
Subject: [Ltib] Re: Install Dillo Problem
Date: Sat, 9 Oct 2010 01:33:28 -0700

Hi Kevin,

I suppose I needed to start X server first and below is what I got, it hanged on the last line, however the screen is showing an X cursor at the center.


address@hidden /]# startx
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/nxp:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
(EE) XKB: Couldn't open rules file /usr/share/X11/xkb/rules/base
Couldn't find keyboard driver keybd
(EE) XKB: Couldn't open rules file /usr/share/X11/xkb/rules/base

----- Original Message ----- From: "Vic" <address@hidden>
To: "Kevin Wells" <address@hidden>
Cc: <address@hidden>
Sent: Friday, October 08, 2010 11:27 PM
Subject: Re: Install Dillo Problem

Hi Kevin,

I used ./ltib -p xorg-server -m prep to install the x11 source, manually put in the EA display patch to kmode.c, did a 'cvs up', deleted /ltib/rpm/BUILD/linux-2.6.34. Had a successful ./ltib recompilation (but with note 1), then rebooted the new uImage to ea3250 board and had trace as Note 2.

Note 1:
Processing deployment operations
making filesystem image file
staging directory is /home/user/ltib/rootfs.tmp
find: `./.dillo': Permission denied
removing the boot directory and files ...

Note 2:

address@hidden /]#
address@hidden /]# xfbdev -mouse mouse &
address@hidden /]# -/bin/sh: xfbdev: not found

[1] + Done(127)                  xfbdev -mouse mouse
address@hidden /]# export DISPLAY=localhost:0.0
address@hidden /]# dillo &
address@hidden /]# paths: Cannot open file '//.dillo/dillorc'
paths: Using /usr/etc/dillo/dillorc
paths: Cannot open file '//.dillo/keysrc'
paths: Using /usr/etc/dillo/keysrc
dillo_dns_init: Here we go! (threaded)
Disabling cookies.
Can't open display "localhost:0.0"

[1] + Done(1)                    dillo
address@hidden /]#


----- Original Message ----- From: "Kevin Wells" <address@hidden>
To: "Vic" <address@hidden>; <address@hidden>
Sent: Monday, October 04, 2010 9:56 AM
Subject: RE: Install Dillo Problem

Hi Vic,

You'll need to do a 'cvs up' in your ltib directory to get
the changes. You should also rename or delete the
linux-2.6.34 directory in ./rpm/BUILD so the changes will
be correctly installed.

The easiest way to install the X11 changes is to install the
Xorg-server source and then manually apply the changes to
the file.

Rebuild all and you should be ok. Install a USB mouse into
the USB host port, boot your board to Linux, and then....

Xfbdev -mouse mouse &
export DISPLAY=localhost:0.0
dillo &

It worked great over here, but the rendering has problems on
some pages with some large blank regions. You might be able
to get some tuning info from Dillo's website. The performance
was quite good.


-----Original Message-----
From: Vic [mailto:address@hidden
Sent: Sunday, October 03, 2010 8:24 PM
To: address@hidden
Cc: Kevin Wells
Subject: Re: Install Dillo Problem

Hi Kevin,

How do I update the SVN code and install the X11 patch?


reply via email to

[Prev in Thread] Current Thread [Next in Thread]