Re: [Ltib] PHP(5.0.4) adding extension feature, compile success, installation fail, Please help.

[Stuart Hughes]

Hi Kevin,

Can you look in the Makefile, or whatever is running:

> Installing PEAR environment:
>
/home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/lib/php/
>
> /home/kevin/lpc3250/ltib-kl/rpm/BUILD/php-5.0.4/sapi/cli/php: 1: Syntax
> error: word unexpected (expecting ")")


That might reveal something.  If it's shell you may be running into an
Ubuntu/dash issue (you'd need bash instead), otherwise you need to
figure out exactly what it is trying to run when that message gets
printed out.

Regards, Stuart


Kevin Li wrote:
> Dear sir or madam:
> 
>  
> 
> I am adding an extension feature( message q support) for PHP ( 5.0.4 for
> Phytec Lpc3250). I can build PHP, but installation for built PHP fails.
> 
>  
> 
> 1.       Successfully build it. ( ./ltib –m scbuild –p php)
> 
> 2.       Fail to install the new build.( ./ltib –m scinstall –p php)
> 
>  
> 
> Below are the dumped out messages.
> 
>  
> 
> It is great appreciate if you can take some time to look at it.
> 
>  
> 
> Regards.
> 
> Kevin
> 
> Dali Wireless Inc.
> 
> 8640 Commerce court,
> 
> Burnaby, BC
> 
> Canada.
> 
>  
> 
>  
> 
> ======================================================================================================================
> 
>  
> 
>  
> 
> Build complete.
> 
> (It is safe to ignore warnings about tempnam and tmpnam).
> 
>  
> 
> + exit 0
> 
> Build time for php: 28 seconds
> 
>  
> 
>  
> 
> Processing: php
> 
> =================
> 
> Build path taken because: directory build, build key set,
> 
>  
> 
> rpmbuild --dbpath /home/kevin/lpc3250/ltib-kl/rootfs//var/lib/rpm
> --target arm --define '_unpackaged_files_terminate_build 0' --define
> '_target_cpu arm' --define '__strip strip' --define '_topdir
> /home/kevin/lpc3250/ltib-kl/rpm' --define '_prefix /usr' --define
> '_tmppath /home/kevin/lpc3250/ltib-kl/tmp' --define '_rpmdir
> /home/kevin/lpc3250/ltib-kl/rpm/RPMS'  --define '_mandir /usr/share/man'
> --define '_sysconfdir /etc' --define '_localstatedir /var' -bi
> --short-circuit  /home/kevin/lpc3250/ltib-kl/dist/lfs-5.1/php/php.spec
> 
> Building target platforms: arm
> 
> Building for target arm
> 
> Executing(%install): /bin/sh -e
> /home/kevin/lpc3250/ltib-kl/tmp/rpm-tmp.79396
> 
> + umask 022
> 
> + cd /home/kevin/lpc3250/ltib-kl/rpm/BUILD
> 
> + cd php-5.0.4
> 
> + rm -rf /home/kevin/lpc3250/ltib-kl/tmp/php
> 
> + mkdir -p
> /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr
> 
> + mkdir -p
> /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/modules
> 
> + mkdir -p
> /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/conf
> 
> + mkdir -p
> /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/htdocs
> 
> + cp /home/kevin/lpc3250/ltib-kl/rootfs/usr/conf/httpd.conf
> /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/conf
> 
> + [ ! -f ./sapi/cli/php.orig ]
> 
> + make -j1 install
> prefix=/home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr
> 
> Installing PHP SAPI module:       apache2handler
> 
> /home/kevin/lpc3250/ltib-kl/rootfs/usr/bin/../build/instdso.sh
> SH_LIBTOOL='/home/kevin/lpc3250/ltib-kl/rootfs/usr/build/libtool'
> libphp5.la
> /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/modules
> 
> /home/kevin/lpc3250/ltib-kl/rootfs/usr/build/libtool --mode=install cp
> libphp5.la
> /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/modules/
> 
> cp .libs/libphp5.so
> /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/modules/libphp5.so
> 
> cp .libs/libphp5.lai
> /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/modules/libphp5.la
> 
> libtool: install: warning: remember to run `libtool --finish
> /home/kevin/lpc3250/ltib-kl/rpm/BUILD/php-5.0.4/libs'
> 
> chmod 755
> /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/modules/libphp5.so
> 
> [activating module `php5' in
> /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/conf/httpd.conf]
> 
> Installing PHP CLI binary:       
> /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/bin/
> 
> Installing PHP CLI man page:     
> /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/man/man1/
> 
> Installing PEAR environment:     
> /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/lib/php/
> 
> /home/kevin/lpc3250/ltib-kl/rpm/BUILD/php-5.0.4/sapi/cli/php: 1: Syntax
> error: word unexpected (expecting ")")
> 
> make[1]: *** [install-pear-installer] Error 2
> 
> make: *** [install-pear] Error 2
> 
> error: Bad exit status from
> /home/kevin/lpc3250/ltib-kl/tmp/rpm-tmp.79396 (%install)
> 
>  
> 
>  
> 
> RPM build errors:
> 
>     Bad exit status from /home/kevin/lpc3250/ltib-kl/tmp/rpm-tmp.79396
> (%install)
> 
> Build time for php: 1 seconds
> 
>  
> 
> Failed building php
> 
>  
> 
>  
> 
> f_buildrpms() returned an error, exiting
> 
> traceback:
> 
>  main:567
> 
>  
> 
>  
> 
> Started: Wed Oct 13 12:22:03 2010
> 
> Ended:   Wed Oct 13 12:23:53 2010
> 
> Elapsed: 110 seconds
> 
>  
> 
> VERSION          : 10.1.1
> 
> CVS_VERSION      : $Revision: 1.71 $ (Savannah)
> 
> PLATFORM         : phy3250
> 
> GNUTARCH         : arm
> 
> TOOLCHAIN        : tc-nxp-lnx-arm-3.4.5-1.i386.rpm
> 
> TOOLCHAIN_CFLAGS : -fsigned-char -msoft-float -O3
> 
>  
> 
> These packages failed to build:
> 
> php
> 
>  
> 
> Build Failed
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> LTIB home page: http://ltib.org
> 
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib