[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Ltib] mmcblk0: error -115 sending stop command

From: Stuart Hughes
Subject: Re: [Ltib] mmcblk0: error -115 sending stop command
Date: Sat, 13 Nov 2010 14:43:36 +0000
User-agent: Thunderbird (X11/20080707)

Hi Casper (Nolan?),

You need to worry about these messages.  Make sure you have free space
on the device.  Also mount it in another machine (with a card reader)
and check to see that there is nothing wrong with the device itself.

Regards, Stuart

casper iway wrote:
> Hello guyz, i just work back with my LPC3131 board. I was able to setup
> a Remote System Explorer (TM/RSE) before with this board, but that was
> using NFS mount Root Filesystem. Now i planning to boot the Filesystem
> in my MMC/SD card, but the problem is, but during booting up of ARM
> Linux (Kernel in NAND, RFS in MMC card),  i could see a lot of warning
> message something like "*cp: write error: No space left on device*". But
> it will probably and successfully continue to boot ARM Linux but then
> after a while i could read lots of warning like "*mmcblk0: error -115
> sending stop command, response 0xc00, card status 0xe00*".  Those
> warning always shown every sometime, but doesn't really affect the
> system because i could still do all Linux commands like browse
> directory, top, etc... But i just got annoyed with those warnings as
> they are shown almost every minute...
> Did someone knows this problem?? Please help...
> regards,
> Nolan

reply via email to

[Prev in Thread] Current Thread [Next in Thread]