[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Ltib] Booting from SDHC

From: Reer, Carolyn (SA-1)
Subject: RE: [Ltib] Booting from SDHC
Date: Wed, 17 Nov 2010 09:47:49 -0500

I know it’s a dumb question. The write protect is switch is tiny, I tried it both positions.

When it’s not locked I can write to the 256MB not included in the /dev/mmcblk0p1 partition.


I guess if all else fails, I can scrub the file system to a bare minimum to fit in 256MB, create a small p2 partition and boot from that partition.

Of course I am assuming I can CREATE a 2nd partition!


Carolyn Reer



From: Matt Wilbur [mailto:address@hidden
Sent: Wednesday, November 17, 2010 9:43 AM
To: Reer, Carolyn (SA-1)
Cc: ltib-users
Subject: Re: [Ltib] Booting from SDHC


But I can’t write to it.


Here's a dumb question:  Is the write-protect switch on?  I am evaluating an NAND controller, and when I couldn't write to it the FAE said write protection for SD cards is mechanical only.






reply via email to

[Prev in Thread] Current Thread [Next in Thread]