[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Ltib] redboot partition table parsing
From: |
Jürgen Lambrecht |
Subject: |
[Ltib] redboot partition table parsing |
Date: |
Thu, 10 Mar 2011 16:25:08 +0100 |
User-agent: |
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.13) Gecko/20101208 Thunderbird/3.1.7 |
Hello,
I compiled a linux 2.6.35.11, to be booted by redboot.
The old linux 2.6.22 boots fine, but now the 2.6.35.11 linux does not
find the redboot FIS table:
In the linux config the FIS table is still at sector 4
(correct)(CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK), but still this is printed:
Searching for RedBoot partition table in mxc_nand at offset 0x5aa0000
But the FIS table is in sector 4 (0x80000).
Why does the kernel not look in sector 4?
This solution does not help:
http://forums.freescale.com/t5/Other-Microcontrollers/Linux-not-parsing-RedBoot-partition-table/m-p/32046.
Although ltib generates a 19MB rootfs, and with the mkfs.jffs2 command,
it gives a 59MB rootfs?
Regards,
Jürgen
--
Jürgen Lambrecht
R&D Associate
Tel: +32 (0)51 303045 Fax: +32 (0)51 310670
http://www.televic-rail.com
Televic Rail NV - Leo Bekaertlaan 1 - 8870 Izegem - Belgium
Company number 0825.539.581 - RPR Kortrijk
- [Ltib] redboot partition table parsing,
Jürgen Lambrecht <=