ltib
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Ltib] mpc832x.dtb


From: Érico Porto
Subject: Re: [Ltib] mpc832x.dtb
Date: Wed, 18 Jan 2012 09:47:33 -0200

Hello Stuart, you are right! I was super user when I was doing some stuff and that was the reason things were not working well.. Always forgot the normal rules.

Érico V. Porto


On Wed, Jan 18, 2012 at 6:55 AM, Stuart Hughes <address@hidden> wrote:
Hi Erico,

LTIB should look by default in /opt/freescale/pkgs and /opt/ltib/pkgs anything referenced in .spec files before trying a download.  Can you give a specific example of what you're seeing.

Also the normal rules apply, that those files must be readable by the user executing ltib.

Regards, Stuart


On 17/01/12 17:05, Érico Porto wrote:
ok solved that.. I've made it using the dtc tool!

Now I'm having another problem.. I'm trying to create another ltib setup. I've put all the packages from ltib in /opt/freescale/pkgs

but, when I run ltib, it tries to get the packages from the internet. Is there a way to force it to look only on the pkgs already on this directory?

Érico V. Porto


On Tue, Jan 17, 2012 at 10:59 AM, Érico Porto <address@hidden> wrote:
Hey,

Should the .dtb file in rootfs/boot be generated automatically when using ltib? I had an old version that did that. When I tried ltib today, it didn't got me any file, but when I typed help bootm it said that the third parameter wasn't necessary

But I got

=> run protectoff;bootm 0xfe200000 0xff000000 
Un-Protect Flash Sectors 4-514 in Bank # 1
...........................................................................................e
## Booting image at fe200000 ...
   Image Name:   Linux-2.6.20.6
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    637639 Bytes = 622.7 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at ff000000 ...
   Image Name:   uboot ext2 ramdisk rootfs
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    10051104 Bytes =  9.6 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Ramdisk to 07615000, end 07faae20 ... OK

until here, than the boot process stopped.. or at least I'm getting nothin on my serial.

Regards

Érico V. Porto

_______________________________________________ LTIB home page: http://ltib.org Ltib mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/ltib



reply via email to

[Prev in Thread] Current Thread [Next in Thread]