Re: [Ltib] help: "edje_cc: Command not found"

[Stuart Hughes]

Looks like you may have misread the instructions; where you have:
 –hostcf (one -) it should be --hostcf
this is so that it builds the support packages to run on the host.

Try re-running using --hostcf for each of the packages you list.  You
also need to run: ./ltib --hostcf -p edb to install another dependency.

To check that edje was built for the host, make sure you can find and
execute: /opt/ltib/usr/bin/edje_cc and it should spit out some helpful
usage message.

Regards, Stuart

On 26/02/12 11:34, wolfking wrote:
> Dear All:
>   I'm building the xorg with windows manager "enlightenment" on the
> freescale's MPC8641D HPCN Board.
>   Before this, I've sucessfully built the minimum linux and run it fine
> on the board. I add the above package by ltib's configue" ./ltib
> --configure",
> and prepare the host side packages:
> $ ./ltib –hostcf -p eet.spec
> $ ./ltib –hostcf -p embryo.spec
> $ ./ltib –hostcf -p evas.spec
> $ ./ltib –hostcf -p ecore.spec
> $ ./ltib –hostcf -p edje.spec
>   then the build process begin and end with the following error. I found
> the edje_cc under the directory "/myLtib/ltib/rootfs/usr/bin", so my
> system has the
> needed file. Why can't the ltib can't find the file? Can you give me
> some hint?
>   Thanks in advance!
>  
> ------------------------------------------------------------------------
> emotion 0.1.0.042
> ------------------------------------------------------------------------
> Configuration Options Summary:
>   Modules:
>     Xine...............: no
>     Vlc................: no
>     Gstreamer..........: yes
>     Gstreamer plugins..: no (you should install gst-plugins-base and
> gst-ffmpeg)
>     Gstreamer FFmpeg...: no
>     Gstreamer CDDA.....:
>   Compilation..........: make
>   Installation.........: make install
>     prefix.........: /usr
> + make
> make  all-recursive
> make[1]: Entering directory `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042'
> Making all in src
> make[2]: Entering directory `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/src'
> Making all in lib
> make[3]: Entering directory
> `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/src/lib'
> make[3]: Nothing to be done for `all'.
> make[3]: Leaving directory
> `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/src/lib'
> Making all in bin
> make[3]: Entering directory
> `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/src/bin'
> make[3]: Nothing to be done for `all'.
> make[3]: Leaving directory
> `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/src/bin'
> Making all in modules
> make[3]: Entering directory
> `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/src/modules'
> Making all in xine
> make[4]: Entering directory
> `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/src/modules/xine'
> make[4]: Nothing to be done for `all'.
> make[4]: Leaving directory
> `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/src/modules/xine'
> Making all in gstreamer
> make[4]: Entering directory
> `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/src/modules/gstreamer'
> make[4]: Nothing to be done for `all'.
> make[4]: Leaving directory
> `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/src/modules/gstreamer'
> Making all in vlc
> make[4]: Entering directory
> `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/src/modules/vlc'
> make[4]: Nothing to be done for `all'.
> make[4]: Leaving directory
> `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/src/modules/vlc'
> make[4]: Entering directory
> `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/src/modules'
> make[4]: Nothing to be done for `all-am'.
> make[4]: Leaving directory
> `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/src/modules'
> make[3]: Leaving directory
> `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/src/modules'
> make[3]: Entering directory `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/src'
> make[3]: Nothing to be done for `all-am'.
> make[3]: Leaving directory `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/src'
> make[2]: Leaving directory `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/src'
> Making all in data
> make[2]: Entering directory `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/data'
> edje_cc -v -id ../data -fd ../data \
>  ../data/theme.edc \
>  ../data/theme.edj
> make[2]: edje_cc: Command not found
> make[2]: *** [theme.edj] Error 127
> make[2]: Leaving directory `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042/data'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/myLtib/ltib/rpm/BUILD/emotion-0.1.0.042'
> make: *** [all] Error 2
> error: Bad exit status from /myLtib/ltib/tmp/rpm-tmp.42617 (%build)
> 
> RPM build errors:
>     Bad exit status from /myLtib/ltib/tmp/rpm-tmp.42617 (%build)
> Build time for emotion: 18 seconds
> Failed building emotion
> 
> f_buildrpms() returned an error, exiting
> traceback:
>  main:569
> 
> Started: Sun Feb 26 17:24:40 2012
> Ended:   Sun Feb 26 19:17:14 2012
> Elapsed: 6754 seconds
> VERSION          : 11.4.1
> CVS_VERSION      : $Revision: 1.79 $ (Savannah)
> PLATFORM         : mpc8641hpcn
> GNUTARCH         : powerpc
> TOOLCHAIN        : freescale-powerpc-linux-gnu-4.1-78.i686.rpm
> TOOLCHAIN_CFLAGS : -te600
> These packages failed to build:
> emotion
> Build Failed
> 
> 
> 
> _______________________________________________
> LTIB home page: http://ltib.org
> 
> Ltib mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/ltib