[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [lwip-users] why the board sends Gratuitous ARP always?
From: |
Martin Velek |
Subject: |
Re: [lwip-users] why the board sends Gratuitous ARP always? |
Date: |
Sun, 26 Jan 2014 17:53:33 +0100 |
Hi,
nothing is wrong. See
Request for Comments: 5227
http://tools.ietf.org/search/rfc5227
2.1. Probing an Address
Best
Martin
On Sun, Jan 26, 2014 at 3:55 AM, fangcheng_gmail <address@hidden> wrote:
>
> I'm try to implement LWIP on a board based on the MCU MPC5604E from
> Freescale.
>
> I set the IPv4 address to 169.254.1.60 manually (not by DHCP or AUTOIP),
> the board direct connects to one PC with IP address 169.254.1.20. (Network
> gateway is 169.254.1.1)
>
> After each power on reset, the boards always sends gratuitous ARP
> continuously.
>
> The attached picture shows this condition.
>
> What's wrong?
>
>
> Best regards,
>
> Cheng Fang
>
>
> _______________________________________________
> lwip-users mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/lwip-users