[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [lwip-users] PPPoS: Question regarding reconnect after connection lo
From: |
Sylvain Rochet |
Subject: |
Re: [lwip-users] PPPoS: Question regarding reconnect after connection lost |
Date: |
Thu, 6 Apr 2017 15:18:37 +0200 |
User-agent: |
Mutt/1.5.23 (2014-03-12) |
Hi Axel,
On Thu, Apr 06, 2017 at 08:58:10PM +0800, Axel Lin wrote:
>
> Below is what I do to start PPP:
>
> Send "AT+CGDCONT=<cid>,<PDP type>,<APN>"
> Send "AT+CGAUTH=<cid>[, <auth_prot>[, <userId>, <password>]]"
> Send "AT+CFUN=1"
> Send "ATD*99***<cid>#"
>
> ppp_set_usepeerdns(ppp, 1);
> ppp_set_auth(ppp, PPPAUTHTYPE_ANY, userId, password);
> ppp_connect(ppp, 0);
>
> My understanding is after ATD*99***1#, I cannot send AT commands.
> So it's not clear to me if I need to re-send above AT commands after got
> PPPERR_CONNECT. Currently I just call ppp_connect(ppp, 30); to reconnect.
You have to resend AT commands to reconnect. You need to switch back
your modem to command mode before, either by using DTR signal or by
using a predefined escape sequence that could never happen in the PPP
flow (which I do not recommend unless you are very careful with the
chosen asyncmap).
Sylvain
signature.asc
Description: Digital signature