[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [lwip-users] PPPoS: ppp session disconnect if hit bad fcs for LCP pa
Re: [lwip-users] PPPoS: ppp session disconnect if hit bad fcs for LCP packet
Thu, 6 Jul 2017 15:30:19 +0800
2017-07-01 12:28 GMT+08:00 Axel Lin <address@hidden>:
> 2017-07-01 0:47 GMT+08:00 Patrick Klos <address@hidden>:
>> On 6/30/2017 11:18 AM, Axel Lin wrote:
>>> It's not easy to hit this issue, usually it needs to run for a couple
>>> hours or more than one day.
>>> But the symptom seems to be the same.
>>> BTW, my device always keep sending data to LTE through pppos.
>>> I'm wondering why the bad fcs usually happened on LCP packet.
>> Can you dump out the failing LCP packet? And maybe a few of the preceding
>> packets? What kind of connection do you have between the micro running lwip
>> and the LTE modem? Is there any way to tap that serial link and watch it to
>> compare that against your micro's serial receive routine?
> Hi Patrick,
> I cannot tap the serial link now, but I will try to dump out the failing
> My device keep sending data to a http server.
> i.e. compare to the the total traffic count, LCP packet is pretty small count.
> So i'm wondering why the bad fcs usually happens on LCP packet.
> I have to test it more times.
The bad fcs issue I hit is because of running out of pbuf.
pppos_input: NO FREE PBUFS!
pppos_input: Dropping bad fcs 0xceb3 proto=0xb7
I'm testing again after increasing number of PBUF_POOL.