[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: LYNX-DEV suggestion
From: |
T.E.Dickey |
Subject: |
Re: LYNX-DEV suggestion |
Date: |
Thu, 5 Feb 1998 11:43:32 -0500 (EST) |
> From: Michael Ritzert <address@hidden>
>
> > Larry W. Virden, x2487 writes:
> > > Well, the good news is that, as far as I am aware, the latest development
> > > version of lynx has this capability. The bad news is that I have yet
> > > to figure out how to get it to work with xterm or rxvt.
> >
> > You have to start lynx as "lynx -use_mouse". From trial and error
>
> I have tried this and still am not able to get it to work.
>
> I am using lynx development version 111. I am compiling on a
> SPARC/Solaris 2.5.1/Sun compiler cc 4.2/ncurses 4.1+patches thru Jan 31.
> I am using Sun's xterm, with this terminfo entry:
you need a 'kmous' string (see the terminfo.src in ncurses for comparison).
also:
I advise against using the xterm terminfo description with rxvt because
the function-key mapping is not compatible (home/end/delete).
> # Reconstructed via infocmp from file: /usr/local/lib/terminfo/x/xterm
> xterm|Sun Microsystems 101A and TYPE4 keyboards for SUN Sparc Workstations,
> am, km, mir, msgr, xenl, xon,
> cols#80, it#8, lines#24,
> acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
> bel=^G, blink=@, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
> csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b,
> cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
> cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
> dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
> ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
> home=\E[H, ht=\t, hts=\EH, il=\E[%p1%dL, il1=\E[L,
> ind=\ED, kFND=\E[209z, kLFT=\E[213z, kRIT=\E[254z,
> kbeg=\E[210z, kbs=\b, kcan=^_, kcbt=\E[240z,
> kcmd=\E[253z, kcpy=\E[227z, kcub1=\E[D, kcud1=\E[B,
> kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[249z, kdl1=\E[230z,
> kent=\E[250z, kext=\E1, kfnd=\E[208z, khlp=\E[255z,
> khome=\E[214z, khts=\E[252z, kich1=\E[247z,
> kil1=\E[229z, kind=\E[211z, kmrk=^\, knp=\E[222z,
> knxt=\E[232z, kopn=\E[233z, kpp=\E[216z, krfr=\E[220z,
> kri=\E[212z, krpl=\E[228z, ksav=\E[234z, kslt=\E[235z,
> kund=\E[231z, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
> rmir=\E[4l, rmso=\E[m, rmul=\E[m,
> rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
> address@hidden, sc=\E7,
>
> sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;,
> sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m,
> smul=\E[4m, tbc=\E[3g,
>
> I am using
> ./configure --prefix=/projects/intranet/
> --libdir=/projects/intranet/lib/lynx/ --enable-externs --enable-nsl-fork
> --with-screen=ncurses --with-zlib
>
> I have, in my installed version of lynx.cfg,
> USE_MOUSE: TRUE
>
> There no longer appears to be a configure option for telling the code to
> build - apparently if you use ncurses (which I am) that happens automatically.
which configure option are you talking about?
> Yet, pressing the left mouse button my lynx does nothing.
>
> I suspect this is a terminfo situation. However, I am not certain.
>
> Perhaps if particular terminfo attributes _are_ required info about
> that could be added to the lynx.cfg file or a new document file?
>
> --
> Larry W. Virden INET: address@hidden
> <URL:http://www.teraform.com/%7Elvirden/> <*> O- "We are all Kosh."
> Unless explicitly stated to the contrary, nothing in this posting should
> be construed as representing my employer's opinions.
>
--
Thomas E. Dickey
address@hidden
http://www.clark.net/pub/dickey
- LYNX-DEV suggestion, Leiva Chappa, 1998/02/04
- Re: LYNX-DEV suggestion, Jim Spath (Webmaster Jim), 1998/02/04
- Re: LYNX-DEV suggestion, T.E.Dickey, 1998/02/04
- Re: LYNX-DEV suggestion, Philip Webb, 1998/02/05
- Re: LYNX-DEV suggestion, Doug Kaufman, 1998/02/06