[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

started twice

From: Nick Upson
Subject: started twice
Date: Thu, 11 Oct 2007 11:00:17 +0100

I have monitoring a process called bs1, yesterday I had a problem
which I traced back to having 2 copies running at the same time (as it
talks down a serial line that caused problems).

The monit log shows it starting one copy at 16:58 and starting it
again at 17:00.
Normally monit looks after everything fine on this system which has
been used for several weeks, the config entry is below

    check process bs1 with pidfile "/var/run/"
    start program = "/opt/unb/bin/ 1 restart"
    stop program = "/opt/unb/bin/ 1 stop"
    if totalmem > 1000 Mb then
       exec "/bin/bash -c '/bin/echo bs1: memory alert >>
/tmp/monit;/opt/unb/bin/ monit /tmp/monit'"
    if cpu usage > 95% for 3 cycles then
       exec "/bin/bash -c '/bin/echo bs1: cpu usage alert >>
/tmp/monit;/opt/unb/bin/ monit /tmp/monit'"

reply via email to

[Prev in Thread] Current Thread [Next in Thread]