[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [monit] Monit HTTP blank screen

From: Adrian Nadeau
Subject: Re: [monit] Monit HTTP blank screen
Date: Mon, 18 Feb 2008 18:13:26 -0400

Also when I try to ssh into the server where monit is running and run the following command telnet localhost 1533, I get the following output:

Connected to localhost.
Escape character is '^]'.
HTTP/1.0 408 Request Timeout
Date: Mon, 18 Feb 2008 22:11:43 GMT
Server: monit 4.10.1
Content-Type: text/html
Connection: close

<html><head><title>Request Timeout</title></head><body bgcolor=#FFFFFF><h2>Request Timeout</h2>Time out when handling the Request<p><hr><a href="" href="'">'><font size=-1>monit 4.10.1</font></a></body></html>
Connection closed by foreign host.


On 2/18/08, Jan-Henrik Haukeland <address@hidden> wrote:
The config file is okay. You have a network problem and here are a few
things you should check.

1) Make sure that you connect to monit from one of the servers you
have listed in the allow list. If not, monit will just shut down the
connection. That is, you need to connect to monit from either or

2) Make sure that you specify the port number in the URL. That is,

3) Make sure that you do not have a firewall on
blocking connections to port 1533
from the machine you are trying connecting from

4) From you could try this console command and see if
you can connect at all. You should see something like this.

# telnet 1533
Connected to
Escape character is '^]'.
GET / HTTP/1.0

HTTP/1.0 401 Unauthorized

NB: I STRONGLY recommend that you bind the monit http server to
localhost only, since the machine is reachable over
the internet or at least make sure that you have a firewall blocking
all connections to port 1533, except for your own machines that need
to connect to monit. Particularly since you posted your configuration
and credentials. Its relatively easy to spoof the IP address, and if
the username and password is admin:monit you need to do this now.

On 18. feb.. 2008, at 14.28, Adrian Nadeau wrote:

> Hello Everyone,
> Just new to monit and very interested in getting it up and running.
> I've installed Monit and can start it no problem.  However, when I
> try to access the HTTP interface I get a blank white screen with no
> errors, etc.  Here is my monitrc file below.  Any assistance would
> be greatly, greatly appreciated. I've tried a number of different
> values and can't seem to get it working.  Thank you in advance!
> Adrian

To unsubscribe:


Adrian Nadeau
Leader Without Title
Evolving Solutions... Keeping it Simple.
reply via email to

[Prev in Thread] Current Thread [Next in Thread]