[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Building monit myself for Linux s390x

From: address@hidden
Subject: Re: Building monit myself for Linux s390x
Date: Sun, 3 Jun 2018 21:49:43 +0200

Hello Lutz,

the support for TLSv1.3 depends on the SSL library ... Monit has support for 
it. The TLSv1.3 is supported for example in the OpenSSL 1.1.0 or later.

Best regards,

> On 3 Jun 2018, at 21:13, Lutz Mader <address@hidden> wrote:
> Hello Tildeslash,
> a question of understanding only.
> I participate in a project and build my own monit program, the people
> plan to use monit in a Linux (s390x) environment.
> I find the following in the configure log:
> checking for zlib.h... yes
> checking for PAM support... enabled
> checking for pam_start in -lpam... yes
> checking for static SSL support... enabled
> checking for SSLv2... yes
> checking for TLSv1.1... yes
> checking for TLSv1.2... yes
> checking for TLSv1.3... no
> checking for EC_KEY support... yes
> checking for ASN1_TIME_diff support... yes
> This should be correct, TLSv1.3 is not available with OpenSSL 1.0.2m or
> OpenSSL 1.0.2o used to bind static to mont 5.25.1 or monit 5.25.2.
>> From my point of view, TLSV13 is an option for SSL settings only, but
> not available in the used OpenSSL libraries today (became available with
> OpenSSL 1.1.0h only, for example).
> In a short word, TLSv1.3 is not available today, with monit 5.25.2?!
> The first time I try to build monit, the libssl.a (and libcrypto.a)
> library was not found, because the useful ssl libraries are available in
> the lib64 folder only (I’m on a SLES 11, s390x 64-bit, system).
> I add the lib64 folder to the configure script therefore, to get the
> 64-bit libraries.
> # Check whether --with-ssl-static was given.
> if test "${with_ssl_static+set}" = set; then :
>  withval=$with_ssl_static;
>                for dir in "$withval" "$withval/include"; do
>            checksslincldir "$dir"
>        done
>        for dir in "$withval" "$withval/lib64“ "$withval/lib"; do
> This is the way to bind static the OpenSSL libraries only.
> I’m wrong, perhaps?!
> With Regards,
> Lutz
> -- 
> To unsubscribe:

reply via email to

[Prev in Thread] Current Thread [Next in Thread]