[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Mingw Octave 3.4.2 - blank gnuplot printouts
From: |
Tatsuro MATSUOKA |
Subject: |
Re: Mingw Octave 3.4.2 - blank gnuplot printouts |
Date: |
Mon, 12 Sep 2011 12:44:41 +0900 (JST) |
Hello
I have deleted share/gnuplot by mistake in the previous packaging.
(In the folder, the prorogue files for postscript terminal are included.)
I have corrected the octave-3.4.2.zip on
http://www.tatsuromatsuoka.com/octave/Eng/Win/
You can correct errors if you copy share/gnuplot from octave-3.4.2.zip and
paste it to the corresponding directory.
I hope the the correction make eliminate errors.
Regards
Tatsuro
--- On Mon, 2011/9/12, Tatsuro MATSUOKA wrote:
> Hello
>
> Using octave built from development source, all prints went without failure.
> Hmmm
>
> Anyway I will look into in detail.
>
> Regards
>
> Tatsuro
>
> --- On Sat, 2011/9/10, Tatsuro MATSUOKA wrote:
>
> > Hello
> >
> > With your package and my current packages
> >
> > graphics_toolkit gnuplot
> > peaks
> > print -demf peaks.emf
> > print -dpng peaks.png
> > print -deps peaks.eps
> > print -dps peaks.ps
> > print -dsvg peaks.svg
> > print -djpg peaks.jpg
> >
> > Success, emf and svg.
> > Failure png, eps, ps and jpg
> >
> > I have not tried the other formats.
> >
> > Hmm. I have not make enough explanation why current build fails in print
> > command in some formats..
> >
> > I have further look into this phenomena.
> >
> > Regards
> >
> > Tatsuro.
> >
> > --- On Fri, 2011/9/9, Nit Nit wrote:
> >
> > >
> > > Hello Tatsuro and other octave maintainers,
> > >
> > > With your mingw build of octave-3.4.2 + gnuplot when using
> > > graphics_toolkit('gnuplot') - printing a figure (with 'print') always
> > > produce a blank page.
> > > This happens with my installation tree (as can be downloaded with mingw
> > > octave 3.4.2 links in your wiki
> > > http://wiki.octave.org/wiki.pl?OctaveForWindows).
> > >
> > > For graphics_toolkit('fltk') printing is ok !
> > >
> > > With previous mingw build of octave 3.2.4 with
> > > graphics_toolkit('gnuplot'), printed figures are ok.
> > >
> > > Are you also facing this problem ? Do you have any idea what may cause it
> > > ?
> > >
> > > Regards,
> > >
> > > Nitzan
> >
>
- Mingw Octave 3.4.2 - blank gnuplot printouts, Nit Nit, 2011/09/09
- Re: Mingw Octave 3.4.2 - blank gnuplot printouts,
Tatsuro MATSUOKA <=
- Re: Mingw Octave 3.4.2 - blank gnuplot printouts, Nit Nit, 2011/09/12
- Re: Mingw Octave 3.4.2 - blank gnuplot printouts, Nit Nit, 2011/09/12
- Re: Mingw Octave 3.4.2 - blank gnuplot printouts, Tatsuro MATSUOKA, 2011/09/12
- Re: Mingw Octave 3.4.2 - blank gnuplot printouts, Tatsuro MATSUOKA, 2011/09/12
- Re: Mingw Octave 3.4.2 - blank gnuplot printouts, Tatsuro MATSUOKA, 2011/09/13
- Re: Mingw Octave 3.4.2 - blank gnuplot printouts, Nit Nit, 2011/09/13