[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: dev (gui) build does not start on kubuntu 13.04
From: |
Torsten |
Subject: |
Re: dev (gui) build does not start on kubuntu 13.04 |
Date: |
Sun, 18 Aug 2013 15:05:31 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130804 Thunderbird/17.0.8 |
On 18.08.2013 14:36, Ben Abbott wrote:
>
> On Aug 18, 2013, at 4:54 AM, Kirill Fuior wrote:
>
>> Hi all,
>>
>> I'm trying to build and run octave from dev sources (according to
>> etc/HACKING and wiki instructions), but I face a problem -- after successful
>> build it simply does not start.
>>
>> My actions step-by-step:
>> * install build-dep octave and bison (it isn't included)
>> * clone hg repository
>> * bootstrap, configure (without custom options) and make.
>> make is passed without errors (with only some compile warnings)
>> * then I try ./run-octave or .build/src/octave script and it simply does
>> nothing, without any output.
>> Only once it showed me wizard "It seems you are running octave gui first
>> time..." with only 1 active button "finish". When I click it, wizard has
>> been closed and again -- nothing else happen.
>>
>> But src/octave-cli runs octave in terminal.
>> Also, if I install latest (3.6.4) octave from the repository, it works.
>>
>> So it seems problem is in gui.
>>
>> I use Kubuntu 13.04 with latest recommended updates (kde 4.10.5, Qt 4.8.4).
>>
>> Note:
>> It worked few month ago, on Kubuntu 12.10.
>>
>> I haven't found this issue neither in the known issues list, nor on bug
>> tracker.
>> I haven't report this as a bug yet, because it may be that I'm doing
>> something wrong (?).
>>
>> I really don't know what to do.
>> Could anyone help me with this?
>>
>> Thanks in advance,
>> Kirill Fuior.
>
> I may be able to confirm a problem.
>
> I haven't tried the gui in a while. Today with "hg id" -> "1c21f264d26f+ tip
> @", Octave exists with "Abort trap: 6". The log from MacOSX is attached.
>
> From gdb, the gui intially runs and allows me to enter a command. After
> entering "plot (rand (3))" ...
>
> Program received signal EXC_BAD_ACCESS, Could not access memory.
> Reason: KERN_INVALID_ADDRESS at address: 0x0000000000000218
> 0x00007fff89926b06 in glDrawBuffer ()
> (gdb) bt
> #0 0x00007fff89926b06 in glDrawBuffer ()
> #1 0x0000000116888164 in Fl_Gl_Window::flush ()
> #2 0x0000000116ccf1e5 in -[FLView drawRect:] ()
> #3 0x00007fff8d4602ce in -[NSView _drawRect:clip:] ()
> #4 0x00007fff8d48d49b in -[NSView
> _recursiveDisplayAllDirtyWithLockFocus:visRect:] ()
> #5 0x00007fff8d48d8c7 in -[NSView
> _recursiveDisplayAllDirtyWithLockFocus:visRect:] ()
> #6 0x00007fff8d45d8a9 in -[NSView
> _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topView:]
> ()
> #7 0x00007fff8d45cda3 in -[NSThemeFrame
> _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topView:]
> ()
> #8 0x00007fff8d4581bb in -[NSView
> _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] ()
> #9 0x00007fff8d450c35 in -[NSView displayIfNeeded] ()
> #10 0x00007fff8d450375 in
> _handleWindowNeedsDisplayOrLayoutOrUpdateConstraints ()
> #11 0x00007fff85e2a8e7 in
> __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__ ()
> #12 0x00007fff85e2a846 in __CFRunLoopDoObservers ()
> #13 0x00007fff85dffaf9 in __CFRunLoopRun ()
> #14 0x00007fff85dff486 in CFRunLoopRunSpecific ()
> #15 0x00007fff8a9cd2bf in RunCurrentEventLoopInMode ()
> #16 0x00007fff8a9d44bf in ReceiveNextEventCommon ()
> #17 0x00007fff8a9d43fa in BlockUntilNextEventMatchingListInMode ()
> #18 0x00007fff8d414779 in _DPSNextEvent ()
> #19 0x00007fff8d41407d in -[NSApplication
> nextEventMatchingMask:untilDate:inMode:dequeue:] ()
> #20 0x00007fff8d4109b9 in -[NSApplication run] ()
> #21 0x0000000103e16a6f in QEventDispatcherMac::processEvents ()
> #22 0x0000000104c906f8 in QEventLoop::exec ()
> #23 0x0000000104c93a23 in QCoreApplication::exec ()
> #24 0x000000010008c009 in octave_start_gui ()
> #25 0x000000010000aa4f in main ()
>
> Ben
>
Can you say how long ago the gui was working correctly?
Torsten
- dev (gui) build does not start on kubuntu 13.04, Kirill Fuior, 2013/08/18
- Re: dev (gui) build does not start on kubuntu 13.04, Torsten, 2013/08/18
- Re: dev (gui) build does not start on kubuntu 13.04, Ben Abbott, 2013/08/18
- Re: dev (gui) build does not start on kubuntu 13.04,
Torsten <=
- Re: dev (gui) build does not start on kubuntu 13.04, Ben Abbott, 2013/08/18
- Re: dev (gui) build does not run on MacOSX, Ben Abbott, 2013/08/18
- Re: dev (gui) build does not run on MacOSX, Torsten, 2013/08/18
- Re: dev (gui) build does not run on MacOSX, Ben Abbott, 2013/08/18
- Re: dev (gui) build does not run on MacOSX, Dmitri A. Sergatskov, 2013/08/18
- Re: dev (gui) build does not run on MacOSX, Ben Abbott, 2013/08/18
- Re: dev (gui) build does not run on MacOSX, Dmitri A. Sergatskov, 2013/08/18
- Re: dev (gui) build does not start on kubuntu 13.04, Kirill Fuior, 2013/08/18
Re: dev (gui) build does not start on kubuntu 13.04, Daniel J Sebald, 2013/08/18