|
From: | Anirudha Bose |
Subject: | Re: MXE Octave: "... has no symbols" warning under Mac OS X |
Date: | Wed, 25 Sep 2013 14:40:37 +0530 |
I modified octave.mk and added "--without-x" to configure. Unfortunately, I get the same error.On Sep 24, 2013, at 4:35 PM, Anirudha Bose wrote:
> On Wed, Sep 25, 2013 at 1:56 AM, Anirudha Bose <address@hidden> wrote:
>
> On Wed, Sep 25, 2013 at 1:32 AM, Ben Abbott <address@hidden> wrote:
> On Sep 24, 2013, at 11:41 AM, Ben Abbott wrote:
>
> > On Sep 24, 2013, at 2:59 AM, Anirudha Bose wrote:
> >
> >> If you send me the entire log of octave then I can understand better. I am not getting any such errors while building octave.
> >
> > I started by build with a "sudo make clean" and then ...
> >
> > $ autoconf
> > $ ./configure --enable-native-build --enable-shared --disable-static \
> > --target=darwin --build=darwin --host=darwin \
> > --enable-pic-flag
> > checking for gawk... gawk
> > checking for grep that handles long lines and -e... /opt/local/bin/grep
> > checking whether ln -s works... yes
> > checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p
> > checking for a BSD-compatible install... /opt/local/bin/ginstall -c
> > checking for darwin-gcc... no
> > checking for gcc... gcc
> > checking whether the C compiler works... yes
> > checking for C compiler default output file name... a.out
> > checking for suffix of executables...
> > checking whether we are cross compiling... no
> > checking for suffix of object files... o
> > checking whether we are using the GNU C compiler... yes
> > checking whether gcc accepts -g... yes
> > checking for gcc option to accept ISO C89... none needed
> > checking how to run the C preprocessor... gcc -E
> > checking for egrep... /opt/local/bin/grep -E
> > checking whether gcc needs -traditional... no
> > darwin
> > configure: creating ./config.status
> > config.status: creating Makefile
> > config.status: creating tools/set_mxe_env.sh
> > $ sudo make octave
> > [check requirements]
> > [build] build-autoconf
> > [done] build-autoconf
> > [build] build-automake
> > [done] build-automake
> > [build] build-bison
> > [done] build-bison
> > [build] build-cmake
> > [done] build-cmake
> > [build] build-flex
> > [done] build-flex
> > [build] build-gperf
> > [done] build-gperf
> > [build] build-libtool
> > [done] build-libtool
> > [build] build-pkg-config
> > [done] build-pkg-config
> > [build] build-texinfo
> > [done] build-texinfo
> > # create the CMake toolchain file
> > [ -d '/Users/bpabbott/Development/mercurial/mxe-octave-anirudha/usr/x86_64-apple-darwin11.4.2/share/cmake/' ] || mkdir -p '/Users/bpabbott/Development/mercurial/mxe-octave-anirudha/usr/x86_64-apple-darwin11.4.2/share/cmake/'
> > (if [ darwin = mingw ]; then echo 'set(CMAKE_SYSTEM_NAME Windows)'; echo 'set(MSYS 1)'; fi; if [ darwin = msvc ]; then echo 'set(MSVC 1)'; fi; if [ yes = yes ]; then echo 'set(BUILD_SHARED_LIBS ON)'; else echo 'set(BUILD_SHARED_LIBS OFF)'; fi; if [ no = yes ]; then echo 'set(BUILD_STATIC_LIBS ON)'; else echo 'set(BUILD_STATIC_LIBS OFF)'; fi; echo 'set(CMAKE_BUILD_TYPE Release)'; if [ darwin = msvc ]; then echo 'set(CMAKE_FIND_ROOT_PATH )'; echo 'set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM BOTH)'; else echo 'set(CMAKE_FIND_ROOT_PATH /Users/bpabbott/Development/mercurial/mxe-octave-anirudha/usr/x86_64-apple-darwin11.4.2)'; echo 'set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)'; fi; echo 'set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)'; echo 'set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)'; echo 'set(CMAKE_C_COMPILER gcc)'; echo 'set(CMAKE_CXX_COMPILER g++)'; echo 'set(CMAKE_Fortran_COMPILER /opt/local/bin/gfortran-mp-4.7)'; echo 'set(CMAKE_RC_COMPILER true)'; echo 'set(PKG_CONFIG_EXECUTABLE pkg-config)'; echo 'set(QT_QMAKE_EXECUTABLE qmake)'; if [ darwin = msvc ]; then echo 'set(CMAKE_INSTALL_PREFIX CACHE PATH "Installation Prefix")'; else echo 'set(CMAKE_INSTALL_PREFIX /Users/bpabbott/Development/mercurial/mxe-octave-anirudha/usr/x86_64-apple-darwin11.4.2 CACHE PATH "Installation Prefix")'; fi; echo 'set(CMAKE_BUILD_TYPE Release CACHE STRING "Debug|Release|RelWithDebInfo|MinSizeRel")') > '/Users/bpabbott/Development/mercurial/mxe-octave-anirudha/usr/x86_64-apple-darwin11.4.2/share/cmake/mxe-conf.cmake'
> > touch cmake-toolchain-file.stamp
> > [build] blas
> > [done] blas
> > [build] lapack
> > [done] lapack
> > [build] arpack
> > [done] arpack
> > [build] gmp
> > [done] gmp
> > [build] nettle
> > [done] nettle
> > [build] zlib
> > [done] zlib
> > [build] gnutls
> > [done] gnutls
> > [build] libiconv
> > [done] libiconv
> > [build] gettext
> > [done] gettext
> > [build] libidn
> > [done] libidn
> > [build] libgpg_error
> > [done] libgpg_error
> > [build] libgcrypt
> > [done] libgcrypt
> > [build] libssh2
> > [done] libssh2
> > [build] curl
> > [done] curl
> > [build] fftw
> > [done] fftw
> > [build] jpeg
> > [done] jpeg
> > [build] libpng
> > [done] libpng
> > [done] pthreads
> > [build] freetype
> > [done] freetype
> > [build] fltk
> > [done] fltk
> > [build] expat
> > [done] expat
> > [build] fontconfig
> > [done] fontconfig
> > [build] glpk
> > [done] glpk
> > [build] gnuplot
> > [done] gnuplot
> > [build] bzip2
> > [done] bzip2
> > [build] jasper
> > [done] jasper
> > [build] xz
> > [done] xz
> > [build] tiff
> > [done] tiff
> > [build] lcms
> > [done] lcms
> > [build] libxml2
> > [done] libxml2
> > [build] libtool
> > [done] libtool
> > [build] graphicsmagick
> > [done] graphicsmagick
> > [build] hdf5
> > [done] hdf5
> > [build] pcre
> > [done] pcre
> > [build] pstoedit
> > [done] pstoedit
> > [build] qhull
> > [done] qhull
> > [build] qrupdate
> > [done] qrupdate
> > [build] openssl
> > [done] openssl
> > [build] lcms1
> > [done] lcms1
> > [build] libmng
> > [done] libmng
> > [build] dbus
> > [done] dbus
> > [build] qt
> > [done] qt
> > [build] qscintilla
> > [done] qscintilla
> > [build] ncurses
> > [done] ncurses
> > [build] readline
> > [done] readline
> > [build] suitesparse
> > [done] suitesparse
> > [build] texinfo
> > [done] texinfo
> > [build] octave
> >
> > Failed to build package octave!
> > ------------------------------------------------------------
> > collect2: ld returned 1 exit status
> > make[5]: *** [dldfcn/__magick_read__.la] Error 1
> > make[4]: *** [install] Error 2
> > make[3]: *** [install-recursive] Error 1
> > make[2]: *** [install] Error 2
> > make[1]: *** [build-only-octave] Error 2
> > real 36m42.443s
> > user 26m19.358s
> > sys 2m45.182s
> > ------------------------------------------------------------
> > [log] /Users/bpabbott/Development/mercurial/mxe-octave-anirudha/log/octave
> >
> >
> > The log is attached.
> >
> > Ben
> >
> > <octave.log>
>
> I noticed that the GraphicsMagick's libraries built using MXE are all static. My Macports build includes static libraries. Is that where the problem lies?
>
> GraphicsMagick won't compile as shared library. A separate Makefile has been provided to build shared libraries on UNIX platforms. It didn't work for me. I have used --build=i386 which necessarily compiles the package as static. It works fine for me.
>
> One difference I see in your logs while comparing with mine is that you have X included in your build. I don't think that will be required on Mountain Lion. AFAIK Octave requires an X Server on Snow Leopard only. Can you try building octave with --without-x option? You need to make the change in src/octave.mk specific to Darwin system. I don't have access to my Mac, so I can't help you right you.
>
> Also, if you see the src/graphicsmagick.mk file you will find that it is compiled without X (--without-x), whereas your build is looking for X11 libraries.
>
> I am not sure if --without-x will be recognized while building Octave. You can try two things here: Either uninstall X from your Macports directory, or compile GraphicsMagick with X (other packages in which X has been disabled might also need this change).
>
> - Anirudha
[Prev in Thread] | Current Thread | [Next in Thread] |