[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: problem with docs (Was: make check?)
From: |
Ben Abbott |
Subject: |
Re: problem with docs (Was: make check?) |
Date: |
Sun, 10 Jul 2016 21:25:10 -0400 |
> On Jul 10, 2016, at 8:33 PM, Ben Abbott <address@hidden> wrote:
>
>> On Jul 10, 2016, at 8:09 AM, Ben Abbott <address@hidden> wrote:
>>
>> I tried “make check” for the default branch and encountered the error below.
>>
>> warning: docstring file
>> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
>> error: no such file,
>> '/Users/bpabbott/Development/mercurial/default/build/test/--no-init-path'
>> error: source: error sourcing file
>> '/Users/bpabbott/Development/mercurial/default/build/test/--no-init-path'
>> error: execution exception in --no-init-path
>>
>> Is anyone else seeing this?
>>
>> $ hg tip
>> pulling from /Users/bpabbott/Development/mercurial/octave
>> searching for changes
>> no changes found
>> changeset: 22081:a5a99a830c8c
>> bookmark: @
>> tag: tip
>> user: Mike Miller <address@hidden>
>> date: Thu Jul 07 13:55:37 2016 -0700
>> summary: Set default floating point unit state when initializing the
>> interpreter (bug #48418)
>>
>> Ben
>
> Ok. My mistake. It’s not “make check” that fails. I’m just no longer able to
> build the docs.
>
> I suspect a problem with the changeset below.
>
> http://hg.savannah.gnu.org/hgweb/octave/rev/df50d42d4b1b
>
> I’m not building in the source tree, but have started a build to see if that
> works.
>
> The warnings/errors I see are below.
>
> GEN doc/interpreter/voronoi.txt
> warning: docstring file
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
> error: no such file,
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
> error: source: error sourcing file
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
> error: execution exception in --no-init-path
>
> <snip> </snip>
>
> GEN doc/interpreter/plot-uitoggletoolproperties.texi
> warning: docstring file
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
> error: no such file,
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
> error: source: error sourcing file
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
> error: execution exception in --no-init-path
>
> <snip> </snip>
>
> MAKEINFO ../sources/doc/interpreter/octave.info
> doc/interpreter/plot.texi:102: warning: could not find @image file `plot.txt'
> nor alternate text
> doc/interpreter/plot.texi:422: warning: could not find @image file `hist.txt'
> nor alternate text
> doc/interpreter/plot.texi:1308: warning: could not find @image file
> `errorbar.txt' nor alternate text
> doc/interpreter/plot.texi:1576: warning: could not find @image file
> `polar.txt' nor alternate text
> doc/interpreter/plot.texi:2577: warning: could not find @image file
> `mesh.txt' nor alternate text
> doc/interpreter/plot.texi:2600: warning: could not find @image file
> `plot3.txt' nor alternate text
> doc/interpreter/sparse.texi:671: warning: could not find @image file
> `spmatrix.txt' nor alternate text
> doc/interpreter/sparse.texi:1052: warning: could not find @image file
> `spmatrix.txt' nor alternate text
> doc/interpreter/sparse.texi:1104: warning: could not find @image file
> `spchol.txt' nor alternate text
> doc/interpreter/sparse.texi:1109: warning: could not find @image file
> `spcholperm.txt' nor alternate text
>
> <snip> </snip>
>
> GEN doc/interpreter/doc-cache
> warning: docstring file
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
> error: no such file,
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
> error: source: error sourcing file
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
> error: execution exception in --no-init-path
>
> <snip> </snip>
>
> GEN doc/interpreter/voronoi.eps
> warning: docstring file
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
> error: no such file,
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
> error: source: error sourcing file
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
> error: execution exception in --no-init-path
>
> <snip> </snip>
>
> GEN doc/interpreter/splinefit6.eps
> warning: docstring file
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
> error: no such file,
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
> error: source: error sourcing file
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
> error: execution exception in --no-init-path
> TEXI2DVI doc/interpreter/octave.dvi
> /sw/bin/texi2dvi: etex exited with bad status, quitting.
> Makefile:27464: recipe for target 'doc/interpreter/octave.dvi’ failed
>
> Ben
lol, I tried building in the source tree. The result has the same errors as
before and some a new “feature”.
GEN doc/interpreter/triplot.txt
wwaarrnniinngg:: ddooccssttrriinngg ffiillee
''//ssww//llooccaall//sshhaarree//ooccttaavvee//44..11..00++//eettcc//bbuuiilltt--iinn--ddooccssttrriinnggss''
nnoott ffoouunndd
eerrrroorr:: nnoo ssuucchh ffiillee,,
''//UUsseerrss//bbppaabbbbootttt//DDeevveellooppmmeenntt//mmeerrccuurriiaall//ddeeffaauulltt//ssoouurrcceess//----nnoo--iinniitt--ppaatthh''
eerrrroorr:: ssoouurrccee:: eerrrroorr ssoouurrcciinngg ffiillee
''//UUsseerrss//bbppaabbbbootttt//DDeevveellooppmmeenntt//mmeerrccuurriiaall//ddeeffaauulltt//ssoouurrcceess//----nnoo--iinniitt--ppaatthh''
eerrrroorr:: eexxeeccuuttiioonn eexxcceeppttiioonn iinn
----nnoo--iinniitt--ppaatthh
GEN doc/interpreter/griddata.txt
GEN doc/interpreter/convhull.txt
warning: docstring file '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings'
not found
error: no such file,
'/Users/bpabbott/Development/mercurial/default/sources/--no-init-path'
error: source: error sourcing file
'/Users/bpabbott/Development/mercurial/default/sources/--no-init-path'
error: execution exception in --no-init-path
warning: docstring file '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings'
not found
error: no such file,
'/Users/bpabbott/Development/mercurial/default/sources/--no-init-path'
error: source: error sourcing file
'/Users/bpabbott/Development/mercurial/default/sources/--no-init-path'
error: execution exception in --no-init-path
Ben
- make check?, Ben Abbott, 2016/07/10
- Re: make check?, Dmitri A. Sergatskov, 2016/07/10
- Re: make check?, Mike Miller, 2016/07/10
- Re: problem with docs (Was: make check?), Ben Abbott, 2016/07/10
- Re: problem with docs (Was: make check?),
Ben Abbott <=
- Re: problem with docs (Was: make check?), Mike Miller, 2016/07/11
- Re: problem with docs (Was: make check?), Ben Abbott, 2016/07/11
- Re: problem with docs (Was: make check?), Mike Miller, 2016/07/12
- Re: problem with docs (Was: make check?), Ben Abbott, 2016/07/12
- Re: problem with docs (Was: make check?), Mike Miller, 2016/07/14
- Re: problem with docs (Was: make check?), Ben Abbott, 2016/07/14