[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Tiny 1

From: Michel GORRAZ
Subject: Re: [Paparazzi-devel] Tiny 1
Date: Sun, 3 Feb 2008 20:05:04 +0100

Dear Mohammad,

1. PPM_OUT, PPM_OUT & SERV7 are only net labels on the baord schematic. No connection on any header for these signals.(sorry it's an historical design bug :)

2. Not sure to understand your question. The battery should be connected to the pads next the button footprint (Vbat/Gnd) on the AP. The embedded switching power supply (L5973) produce 5V/2A for the servos and  the linear regulator (LM1117) produce 3.3V/1A for the MCU and other peripherals.



2008/1/30, Mohammad Ali Haji Pour <address@hidden>:
Dear all,

Can someone please answer my question about Tiny1:

1. Where PPM0 and PPM_reset and SERV7 should be connected to?

2. How is the main power supply connected to the AP, is it through a regulator?



Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]