[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Paparazzi-devel] Paparazzi quickstart

From: akochevar
Subject: RE: [Paparazzi-devel] Paparazzi quickstart
Date: Mon, 18 Feb 2008 20:37:36 -0700
User-agent: Web-Based Email 4.12.23

My guess is that you have a configuration miss match either in your airframe file, or between baud rates in the GCS and airframe.  This is hard to diagnose without doing it in real time.  I suggest you pop into the IRC channel and wait for some help.  Myself 'anton_home' as well as dc3 poine hecto or jeremyt could all lend a hand.  Others probably as well.  With different AP versions out there configuration can be a bit tricky.


-------- Original Message --------
Subject: [Paparazzi-devel] Paparazzi quickstart
From: David Carr <address@hidden>
Date: Mon, February 18, 2008 3:21 pm
To: address@hidden

Is there any sort of cohesive paparazzi quick start (HOWTO) documentation

I've sucessfully built and loaded the firmware into my Tiny 2.11 board but
I can't seem to get much further towards a working system. I've read most
of the Wiki documentation but I haven't found a real step by step guide.
Perhaps I just haven't been looking in the right place.

At this point I've got paparazzi center started and a serial connection to
my Tiny 2.11. I'd like to connect to the board and get some status. I can
start the telemetry link but I don't see anything that indicates that any
communication is actually happening. I'm sorry for the beginner questions
but I really can't find what I'm looking for in the docs.

Thanks for your help,
David Carr

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]