[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Funjet Back Plate

From: Pascal Brisset
Subject: Re: [Paparazzi-devel] Funjet Back Plate
Date: Thu, 10 Apr 2008 13:08:57 +0200
User-agent: Icedove (X11/20080305)


it is a sandwich of plywood-balsa-plywood, about 1mm-6mm-1mm
But your 6mm board should be ok (probably heavy but ...)


Stephen L Hulme wrote:
Dear Gentlemen
Could someone kindly tell me what material the back plate, upon which the gyroscope and mini B USB connector is mounted in this photo <>, is made of? I initially thought it was plywood and subsequently bought a small piece of 6 mm hooppine ply. Unfortunately the cross section profile was different to that depicted in the photo, causing me to doubt my initial view and thus seek your help. Regards Stephen L Hulme

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]