[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Blank GCS frame!

From: Pascal Brisset
Subject: Re: [Paparazzi-devel] Blank GCS frame!
Date: Sun, 27 Apr 2008 19:57:15 +0200
User-agent: Thunderbird (X11/20080227)


the funjet1.xml is configured for a Maxstream modem in API mode:


So it should work with a Maxstream ground session. Are you using the default "Flight address@hidden" session ? Note that this would not work with a default configured modem which speed is 9600. If it is the case, in the Paparazzi Center, stop the "link" agent, edit the line, replacing 57600 by 9600 and restart the process. If it works, save your session for future use...


Mohammad Ali Haji Pour wrote:
Hi all,

I have some problem with the GCS as I mentioned earlier, but I have got any 
help yet.

I am using Tiny 2.11, commercial IR sensors from FMA, LEA-4P GPS, and Maxstream base and OEM. I have checked all the connections several times, and they are fine. The GPS is configured and I am getting data through u-center.
In PPZ center I am using funjet1.xml for airframe, basic.xml for flight plan 
and setting, cockpitSX.xml for radio, and default.xml for telemetry. All are 
made and uploaded to the Tiny.  I am also getting the red LED of Tiny. 
Everything seems to be fine, but when I execute the Maxstream or serial 
sessions all I get is a blank GCS frame; however, the simulation session is 
working with these files.

I would appreciate any help.

Best Regards,


Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]