[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] GPS tunnel for Tiny1.3 & 2.11

From: Mohammad Ali Haji Pour
Subject: Re: [Paparazzi-devel] GPS tunnel for Tiny1.3 & 2.11
Date: Mon, 02 Jun 2008 16:36:39 +0400


"myplane" and "ppz1" are just the names of the aircraft that should be changed 
with your own plane name if required. you can save a new plane with preferred 
configurations in the ppz center. The tunnel is uploaded with USB and you can 
read from the GPS (in u-center) through the FTDI cable.

Best Regards,


----- Original Message -----
From: C Kuo <address@hidden>
Date: Monday, June 2, 2008 2:40 pm
Subject: [Paparazzi-devel] GPS tunnel for Tiny1.3 & 2.11
To: address@hidden

> Hi guys
>   After long time, I am now able to program my Tiny1.3 board, however, 
> I have
> some question relate to the tunnel for GPS.
>   In the wiki, it say that for Tiny 1.3 the tunnel should be : "make
> AIRCRAFT=myplane tunnel.upload", and for the Tiny2.11 should be "  make
> AIRCRAFT=ppz1 tunnel.upload "
>   I was wondering, from the paparazzi center I can see that putting 
> the tunnel
> target should work with Tiny.2.11, will it work with Tiny 1.3?
>   also, for Tiny1.3, is the tunnel also upload though the USB cable to 
> "serial
> 2" port?
> Thanks 
>                                                           Chen 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]