[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] RE: Programming autopilot in classix!!?? (sina parastg

From: Christophe De Wagter
Subject: [Paparazzi-devel] RE: Programming autopilot in classix!!?? (sina parastgary)
Date: Sat, 28 Jun 2008 09:29:51 +0200

Dear Sina,

Like the wiki shows on the bottom of the classix-hardware page the bootloader uses the P0.23 pin to select between programming or booting. This pin is not connected on the classix "resulting in random behaviour"...

To answer your question I think that trying many times (unpower classix board while USB cable is connected) should be able to solve your problem. If you don't like that option I would suggest the modification illustrated here: that consists in soldering a wire to the unconnected pin (If you do so: make sure it is ruggedized for flight).

Good luck,


---------- Forwarded message ----------
From: sina parastgary <address@hidden>
To: address@hidden
Date: Thu, 26 Jun 2008 22:32:44 -0700 (PDT)
Subject: [Paparazzi-devel] Programming autopilot in classix!!??
Hi everyone,
I had programmed both chips in classix.but i cant program autopilot chip for second time(there is no problem with fbw chip).
please help me.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]