[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Norton AntiSpam] [Paparazzi-devel] Aerocomm AC4868-250

From: Steve Joyce
Subject: Re: [Norton AntiSpam] [Paparazzi-devel] Aerocomm AC4868-250
Date: Tue, 17 Feb 2009 16:53:21 +0100

I'm using them with good results.  I got some tips from Christophe De Wagter on configuration if you look back through the list archives around May last year.  Otherwise the physical connections you can work out with the description in the Wiki and the Aerocomm manual. 
Remember you have to supply a clean 3.3v to the module.  I'm using the tiny13, so I have a separate regulator for the Aerocomm module.  I'm not sure maybe the tiny 2.11 can supply enough current from its own 3.3v regulator.
There was some effort to implement the Aerocomm api to allow some extra features,  I 'm not sure what state it is in, but the modules work fine in serial mode.
Good luck,
----- Original Message -----
From: Rui Costa
Sent: Tuesday, February 17, 2009 4:27 PM
Subject: [Norton AntiSpam] [Paparazzi-devel] Aerocomm AC4868-250

Anyone who's using the Aerocomm AC4868-250? I neew help to make it work with the Tiny 2.11.
Best regards
Rui Costa

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]