[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Connecting Servos

From: Nicholas Wagner
Subject: Re: [Paparazzi-devel] Connecting Servos
Date: Thu, 30 Apr 2009 08:46:24 -0600

Hi Michael - 

I bought a cheap crimper from my LHS and put servo female connectors on each servo cable.  This makes it a bit more modular and has worked fine for us.  If you have trouble with the connectors staying together, just wrap some electrical tape around it.


On Wed, Apr 29, 2009 at 7:37 PM, Michael Caughey <address@hidden> wrote:
What is the best way to connect Servos to the Tiny 2.11?  I have purchased the full 2.11 kit from PPUAV so I have a cable kit which has molex connectors on one end and bare wires on the other.  Do I cut the connectors off the Servos and solder these on to them?  Or do I solder on female servo connectors and just plug the servos in?

Paparazzi-devel mailing list

Nick Wagner
Mechanical Engineering
Colorado State University
C: 970.631.2989
E: address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]