[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] UART1 stopped working

From: David Carlson
Subject: Re: [Paparazzi-devel] UART1 stopped working
Date: Wed, 27 May 2009 18:05:45 +0300
User-agent: Thunderbird (X11/20090318)

I've also had this happen to one LPC. They are not necessarily easy to replace though. Very small pitch. Make sure you have the skills to do it before you attempt it.


PS, sorry Cedric.

Daniel Morgan wrote:
It could also be that you fried your uart..They are pretty sensitive and i have actually had a few go out on me lately. Just need to replace the LPC

On Wed, May 27, 2009 at 8:35 AM, Cédric Marzer <address@hidden <mailto:address@hidden>> wrote:

    I was just trying to answer Andrea's problem, but my bloody email
    doesn't put the > automaticaly.
    Anyway I think Andrea's tunnel is working with USB but not with UART1.
    I also think it is an airframe file problem with the wrong
    settings for the


    >If tunnel is allowing you to talk to the GPS, then both of your UARTs
    >are working fine.  Tunnel pretty much takes what it heres on
    UART1 and
    >repeats it on UART0, and vice versa.

    >I would look in your airframe file.  Make sure you have configured to
    >use the proper serial ports.  For Tiny 2.11, GPS should use UART0 and
    >telemetry should use UART1.


    Paparazzi-devel mailing list
    address@hidden <mailto:address@hidden>


Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]