[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] 3 state switch on any R/C controller

From: 郭 flying pig
Subject: [Paparazzi-devel] 3 state switch on any R/C controller
Date: Sat, 30 May 2009 13:04:07 +0000

Hi there
  I have recently got one of the remote controll from someone, it is 4 channel 40Mhz, the brand is REELY (from Conrad in Germany i believe). I was thinking using for paparazzi.
  I have tap in to the R/C receiver, which was ok (just read the chip number without any measurement), however, I have some didfficulty in making 3 state switch.
  I cut the yaw channel (4th channel), and rewire to 3 state switch (on/off/on), however, when i use it, it seen like only have on/off function.
  Does anyone has done the similar thing about cutting one channel from the controller to make it into the 3 state switch?  can anyone advice?

5 GB 超大容量 、創新便捷、安全防護垃圾郵件和病毒 — 立即升級 Windows Live Hotmail

reply via email to

[Prev in Thread] Current Thread [Next in Thread]