[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] Re: MILIAMP_AT_FULL_THROTTLE

From: Christophe De Wagter
Subject: [Paparazzi-devel] Re: MILIAMP_AT_FULL_THROTTLE
Date: Wed, 17 Jun 2009 10:51:59 +0200

---------- Forwarded message ----------
From: Stephen L Hulme <address@hidden>
Date: Wed, 17 Jun 2009 18:04:40 +1200
Subject: [Paparazzi-devel] Re: MILIAMP_AT_FULL_THROTTLE
Dear Christophe
Can I assume that the updated ~funjet1.xml file showing: Define name="MILLIAMP_AT_FULL_THROTTLE" valve= "2000"/> 
should be changed to say: Define name="MILLIAMP_AT_FULL_THROTTLE" valve="10000" unit="ma"/>, in the first instance
if I am running an AXI 2212/26 motor specified to draw a maximum efficiency current of 10 amps. 

Dear Stephen,

The actual current depends on the motor-propellor-airspeed combination, but about 10 000 milliAmp (or a little more) would be a good first guess if you can not measure it. 



PS: please note you wrote valve instead of value...

reply via email to

[Prev in Thread] Current Thread [Next in Thread]