[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] 3 state switch on any R/C controller

From: Bernard Davison
Subject: Re: [Paparazzi-devel] 3 state switch on any R/C controller
Date: Sun, 21 Jun 2009 23:05:19 +1000

I know it's a little late for this conversation but I've added some links to RS and Mouser parts that are suitable.
Yes the links are for Australian distribution but your local outlets will use the same part numbers.


On 31/05/2009, at 2:57 AM, Rui Costa wrote:

You have to use an on-on-on switch instead of on-off-on. I'm having difficulty to buy this kind of switch in Europe. Anyone knows where to buy it?
Best regards
Rui Costa

2009/5/30 郭 flying pig <address@hidden>
Hi there
  I have recently got one of the remote controll from someone, it is 4 channel 40Mhz, the brand is REELY (from Conrad in Germany i believe). I was thinking using for paparazzi.
  I have tap in to the R/C receiver, which was ok (just read the chip number without any measurement), however, I have some didfficulty in making 3 state switch.
  I cut the yaw channel (4th channel), and rewire to 3 state switch (on/off/on), however, when i use it, it seen like only have on/off function.
  Does anyone has done the similar thing about cutting one channel from the controller to make it into the 3 state switch?  can anyone advice?

5 GB 超大容量 、創新便捷、安全防護垃圾郵件和病毒 — 立即升級 Windows Live Hotmail

Paparazzi-devel mailing list

Rui Costa
Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]