|Subject:||[Paparazzi-devel] Upload Error|
|Date:||Mon, 21 Jun 2010 10:51:02 -0600|
I am getting "no USB device" error when I try to upload. I made a new AC, used the funjetfmi1.xml file and commented out the X-bee transport lines and uncommented the lines underneath the #TRANSPARENT heading. I set my target to ap is this correct?
I have my mini usb plugged into the FTDI utility board, and the three-prong picoblade cable from the FTDI board to the bottom middle eight-prong port on the TWOG. I plugged in the usb side of things before connecting the power to the board.
I have attached a copy of what changes when I plug and unplug the connected FTDI cable. The system recognizes “GPS0”, so I don’t think it is a problem with the USB settings on my Linux Laptop.
As you can probably tell, I am new to a lot of the software aspects of the paparazzi project! Thanks for any advice!
Description: Text document
|[Prev in Thread]||Current Thread||[Next in Thread]|