Re: [Paparazzi-devel] XBee Pro Modem

[Felix Ruess]

See also
http://paparazzi.enac.fr/wiki/XBee_configuration

Cheers, Felix

On Sun, Sep 26, 2010 at 10:08 AM, Christophe De Wagter
<address@hidden> wrote:
> Carefull with the 868MHz modems: when the power level is high, they only
> work "when far enough from each other"!
> Put one a few rooms further away or in a metal cupboard remove highgain
> antennas, or reduce the power level ("+++" wait "ATPL0<enter>")
>
>
>
> -Christophe
>
>
>
> On Sat, Sep 25, 2010 at 11:54 PM, Reto Büttner <address@hidden>
> wrote:
>>
>> Hi all,
>>
>> can someone help me get my XBee Pro modems working. I tried both
>> 2.4GHz and 868MHz. They work neither with paparazzi nor the
>> development kit stable. Sometimes I get some data through, but the
>> performance is very poor. I tried reloading firmware and different
>> baud rates. In X-CTU there is the range test function with the serial
>> loop back plug on the remote end provided in the developement kit. I
>> don't even get that working stable. I tried in Ubuntu/Wine and in
>> Windows.
>>
>> My paparazzi serial connection cable as a modem substitute works fine.
>> All I want the modems to do is replace that serial cable. I don't need
>> mesh functionality at the moment.
>>
>> Do XBee Pro modems need special configuration like operating channel,
>> PAN ID or similar to work? Is one modem required to be the coordinator
>> and the other the router/end device? I played aroud quite a while and
>> nothing really worked. Are there somewhere on the web easy
>> instructions?
>>
>> Thanks for any advice!
>>
>> Reto
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>