[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] Questions about Lisa/ Hardware for a glider

From: Simon Goodwin
Subject: [Paparazzi-devel] Questions about Lisa/ Hardware for a glider
Date: Tue, 02 Nov 2010 00:33:36 +0100
User-agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv: Gecko/20101025 Lightning/1.0b3pre Thunderbird/3.1.5

Hello dear paparazzi developers,

after browsing the wiki and speaking with flixr on the irc channel it seems time speak up in here.

I would like to equip a glider with an autopilot and decided to go with paparazzi. Now I need to get some hardware.

My first thought was to use a tiny as it seems quite easy to obtain and bother about pressure sensors/IMU once I got something into the air.

As I think that a glider without dynamic pressure sensor is not realy sensible I started to look for alternatives.

There are the Lisa boards. If I got it right, the Lisa/L has both a differential as well as an absolute pressure sensor. So it seems to fit the job quite well. I don't think that I need the second processor. At least not yet :-)

The Lisa/M seems nice. Is there an ETA? Is it going to have the two pressure sensors as well?

What hardware would you recommend to somebody with a limited budgetary who needs everything (except the glider model and the rc-system)?

thanks in advance


reply via email to

[Prev in Thread] Current Thread [Next in Thread]