[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Re: airspeed/baro modules

From: Martin Mueller
Subject: Re: [Paparazzi-devel] Re: airspeed/baro modules
Date: Tue, 02 Nov 2010 16:47:41 +0100
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv: Gecko/20101027 Thunderbird/3.0.10

Hi Christian,

On 02.11.2010 12:58, Christian Behrens wrote:
Hi Martin,
our airframe file contains the following:
<subsystem name="i2c"/>
     <load name="baro_scp.xml">
        <flag name="SENSOR_SYNC_SEND"/>
     <load name="airspeed_ets.xml"/>
     <load name="baro_ets.xml"/>
we get the Sensor in the Messages, but do not get any Values.
Did we miss anything?

your config works for me. Do you have an ETS altitude (ets_baro) sensor connected to I2C? If not, you will not get any airspeed_ets values as the I2C is blocked by the failing ets_baro communication. You should see the baro_scp values through SPI though.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]