On Tue, Jan 4, 2011 at 1:46 PM, Leandro Chelini
<
address@hidden> wrote:
> I had a similar problem.
> If you can flash the tiny-chip with - sudo ./paparazzi - I don't understand
> why this would be a hardware issue.
> I'm working with ubuntu. There you can give useres the rights to use ports
> etc. (Usermanager)
> Also check that you are in the right user-group.
>
> Don't forget to restart the system.
>
> Am 04.01.11 13:03, schrieb Manikandtan C. K.:
>
> 1. sudo ./paparazzi works. no Issues.
>
> 2. dmesg | tail -5 gives the following o/p:
>
> address@hidden:~/paparazzi$ dmesg |tail -5
> [ 175.880021] usb 2-5: new full speed USB device using ohci_hcd and address
> 5
> [ 176.288018] usb 2-5: device not accepting address 5, error -62
> [ 176.464021] usb 2-5: new full speed USB device using ohci_hcd and address
> 6
> [ 176.872018] usb 2-5: device not accepting address 6, error -62
> [ 176.872031] hub 2-0:1.0: unable to enumerate USB device on port 5
>
> Is this right? especially the 5th line.
>
> 3. I am a user in the plugdev and copied the rules to udev (confirmed
> visually)
>
> tried running following code at terminal:
>
> make AIRCRAFT= MIcrojet clean_ac ap.upload
>
>
>
> gives the same o/p as before:
>
> no USB device
> make[1]: *** [upload] Error 1
>
>
> make: *** [ap.upload] Error 2
>
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
>
address@hidden
>
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
> _______________________________________________
> Paparazzi-devel mailing list
>
address@hidden
>
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel