[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] Reply to:"PPM encoders with non-blinking LED (Chris Go

From: Chris
Subject: [Paparazzi-devel] Reply to:"PPM encoders with non-blinking LED (Chris Gough)"
Date: Thu, 06 Jan 2011 16:54:40 +0200
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv: Gecko/20101208 Thunderbird/3.1.7

Well when did you bought them?
One cause for that is if you have connected the servo lead the wrong way
Because you say that the presence of the ppm encoder produces Jitter when normally
it should not make a difference i would say to check the wiring.
Are you using only one 5v supply or you have connected an ESC with BEC also?
Is yours with the crystal or without it?
Maybe the wrong firmware is loaded.
Email me with the board type (crystal or not) in order to give you the right firmware.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]