[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] Problem with PPM Signal on TWOG

From: Sven Lorenz
Subject: [Paparazzi-devel] Problem with PPM Signal on TWOG
Date: Sat, 5 Feb 2011 19:18:59 +0100


I've tried to switch to the current master/HEAD version. After transferring all the settings into the new format the actuators in the messages-tool are not changing when moving the sticks. I've connected the PPM signal of my receiver in the proper way, but by just flashing the current version on the TWOG it does not work anymore. Any ideas???

I'm using the same radio files for both (pulse_type="POSITIVE").The new airframe-file has just the line:

"<subsystem name="radio_control" type="ppm"/>"

whereas the old one has (the standard settings):

ap.CFLAGS += -DACTUATORS=\"servos_4017_hw.h\" -DSERVOS_4017
ap.srcs += $(SRC_ARCH)/servos_4017_hw.c actuators.c

ap.srcs += radio_control.c $(SRC_ARCH)/ppm_hw.c  

Best regards,

reply via email to

[Prev in Thread] Current Thread [Next in Thread]