[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Stm32 development software in derbian etch?

From: Felix Ruess
Subject: Re: [Paparazzi-devel] Stm32 development software in derbian etch?
Date: Sat, 26 Feb 2011 14:25:44 +0100

Hi Oliver,

I guess that is the reason then why it is not in dists and not listed...

The debian/ubuntu packages for stm32 toolchain were built with summon-arm-toolchain script and then packaged. You can find it in in SVN on savannah under toolchains: You should be able to do a "make" to build and install the resulting toolchain to /opt/paparazzi/stm32. But if you can build a good package for debian we could add that to the pool and dists.

You can also try to use the newer multilib toolchain. With it you can compile for ARM7TMDI (read lpc21xx), Cortex-M3 (read stm32) and others, so you don't need multiple toolchains anymore.
Just clone paparazzi-portability-support (, cd into linux/linux32/arm-none-eabi-gcc-linaro and type make. The script will get all necessary sources, bootstrap and build the cross compilation toolchain. The resulting toolchain will be in ~/sat (which you might want to add to your PATH to use it).
This is currently still configured to build with the proprietary stm32 library, hopefully we will switch to libopenstm32 soon.

Feedback on this is really appreciated!

Cheers, Felix

On Sat, Feb 26, 2011 at 12:42 AM, Oliver Riesener <address@hidden> wrote:
Hi Felix and Heinrich,

there is a package in debian/pool, but not in debian/dists/*/main/...

It's entry is also missing in the debian/.../Packages.gz.

I try the the workaround to download manuel and install it with the commands below.

# wget
# dpkg -i paparazzi-stm32_1.0.0-5_i386.deb

BUT it didn't work on debian/lenny becourse:

Entpacke Ersatz für paparazzi-stm32 ...
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von paparazzi-stm32:
 paparazzi-stm32 hängt ab von libc6 (>= 2.8); aber:
 Version von libc6 auf dem System ist 2.7-18lenny7.

It's seams to be ubuntu compiled ... i tryed also the oldest version 1.0.0-1

No luck, now, i will try squezze tomorrow ...



(vote for debian)

Am 25.02.2011 17:17, schrieb Felix Ruess:
Hi again,

I was a bit too quick... there is no paparazzi-stm32 package for debian etch. I don't think a stm32 package was ever built for etch. Newer ones might or might not work on etch. As Debian Etch (4.0) is not supported anymore (not even security updates) I would strongly recommend to update your Debian installation to the current stable release Squeeze (6.0) or at least to lenny.

Cheers, Felix

On Fri, Feb 25, 2011 at 12:38 AM, Felix Ruess <address@hidden <mailto:address@hidden>> wrote:


   there is a package for the stm32 toolchain, install the paparazzi-stm32 package on debian/ubuntu systems.
   But we also have a common new cross compilation toolchain (for all bare bone arm processors including the lpc2148 and stm32) in the pipeline.

   Cheers, Felix

   On Thu, Feb 24, 2011 at 9:55 PM, Prof. Dr.-Ing. Heinrich Warmers <address@hidden <mailto:address@hidden>> wrote:

       i want to install  the stm32  development software  in derbian etch but there is no package.
       There  are also conflicts  with the lib6.2 witch is not available.
       Can someone make it available?



       Paparazzi-devel mailing list
       address@hidden <mailto:address@hidden>

Paparazzi-devel mailing list

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]