[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] need help for motor controller with booz

From: Anish Mohammed
Subject: Re: [Paparazzi-devel] need help for motor controller with booz
Date: Wed, 13 Jul 2011 08:20:59 +0100

Wow that is a powerful pentacopter btw folks have tried "hacking"pwm one's to 
make them I2C do try rcgroups 

Anish Mohammed
Twitter: anishmohammed

On 13 Jul 2011, at 06:24, Dong Zhao <address@hidden> wrote:

> Hi, 
> I brought a booz main board for a five rotor UAV. and things follow:
> Motor:  Brushless Outrunner Motor 245Kv power160, continuous current 60A and 
> max brust curent 78A.
> Speed controller: PHOENIX ICE HV 80 brushless speed controller with max 
> volts=50V and max amps=80A.
> The problem at this moment is booz only accept I2C signal from speed 
> controller, but i can't find a I2C controller for this 80A motor. 
> Is this controller available? Where can i buy this speed controller?
> OR,
> If use both motor and speed controller above, how can i convert the PWM from 
> speed controller to I2C signal? 
> OR,
> If I buy a Lisa/L board instead of the booz board and connect the five 
> controllers to the servos section on the Lisa\L board,  is this a solution 
> for this problem?
> If I use this way, how to program?    
> Regards
> Dong
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]