|
From: | Hector Garcia de Marina |
Subject: | Re: [Paparazzi-devel] Problems with Tiny13 and Graupner MC22 digital-servos and compile-erros |
Date: | Thu, 25 Aug 2011 15:36:41 +0200 |
Thanks for the information Hector Garcia de Marina,
have you connected the capacitors in the impulse or vcc wire ?
Regards
Heinrich
Hector Garcia de Marina schrieb:
On Tue, Aug 23, 2011 at 10:39 PM, Eric BAHIER <address@hidden> wrote:
hello,
An possible reason of yours problems, the aswer in your mail
Le 23/08/2011 22:27, Prof. Dr.-Ing. Heinrich Warmers a écrit :Propably, your servo have a big current drink, and generaly on numerique servo this curent is drink in very small time, and very big current, this the perfect scheme to fail the small power supply of the tiny.Hello world,
today we have found same reasons for the malfunction:
1. One digital servo (elevator) stop moving and hang sometimes by collection to receiver or tiny13 . Connecting to a spectrum 2.4GHz the servo work without problems.
Hi, I have a similar problem in the past but with other stuff. It was solved attaching two small capacitors (around 0.01uF) in parallel just to commit this kind of transient.
_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
[Prev in Thread] | Current Thread | [Next in Thread] |