paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] Reply to:"Can't use manual mode (Tasos Sagiotis)"


From: Chris
Subject: [Paparazzi-devel] Reply to:"Can't use manual mode (Tasos Sagiotis)"
Date: Tue, 11 Oct 2011 20:13:11 +0300
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.23) Gecko/20110921 Thunderbird/3.1.15

Hi.
Make sure your radio file contains 8 channels since you use the PPM encoder as i understand.
Here is mine:
<radio name="Cessan177_RE12" data_min="800" data_max="2200" sync_min="5000" sync_max="17000" pulse_type="NEGATIVE"> <channel ctl="C" function="ROLL" min="950" neutral="1500" max="2050" average="0"/> <channel ctl="B" function="PITCH" min="950" neutral="1500" max="2050" average="0"/> <channel ctl="D" function="THROTTLE" min="950" neutral="950" max="2050" average="0"/> <channel ctl="A" function="YAW" min="950" neutral="1500" max="2050" average="0"/> <channel ctl="G" function="MODE" min="950" neutral="1500" max="2050" average="10"/> <channel ctl="F" function="PARACHUTE" min="950" neutral="950" max="2050" average="10"/> <channel ctl="H" function="CAM_LOCK" min="950" neutral="1500" max="2050" average="0"/> <channel ctl="I" function="CAM_ZOOM" min="950" neutral="1500" max="2050" average="0"/>
</radio>

Chris


Message: 1
Date: Tue, 11 Oct 2011 18:18:34 +0300
From: Tasos Sagiotis<address@hidden>
To: address@hidden
Subject: [Paparazzi-devel] Can't use manual mode
Message-ID:<address@hidden>
Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"

Hello,

I use a Tiny v2.11 autopilot wired according to this diagram
<http://paparazzi.enac.fr/wiki/Image:Diagram.png>. I am using the PPM
method with a Futaba T6EXAP transmiter  (radio) and a Futaba R136F
Receiver. The autopilot works fine at the AUTO 2 mode with the PPM's LED
staying constantly on. When powering on the transmiter, the PPM's LED
works as expected blinking at 3Hz but I can't turn to manual mode nor
with the 3-possition switch nor by turning to manual mode via the CGS.
The servo wont do anything when I am moving the transmiter' s sticks.

Any ideas?

-------------- next part --------------
An HTML attachment was scrubbed...
URL:<https://lists.nongnu.org/archive/html/paparazzi-devel/attachments/20111011/c2e2b87d/attachment.html>

------------------------------

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


End of Paparazzi-devel Digest, Vol 91, Issue 32
***********************************************





reply via email to

[Prev in Thread] Current Thread [Next in Thread]