Re: [Paparazzi-devel] ARM Cortex-M4

[Hector Garcia de Marina]

Hi Piotr,

I am using the Olimex's JTAG + openocd. I had to wire out some pins to the programmer.

I have never used SWD protocol, would you recommend me a programmer compatible with openocd to use SWD in STM32? I already checked out http://www.versaloon.com/ , but at this moment I am happy with the JTAG from Olimex, but I am looking for moving to SWD. 

Cheers,

Héctor

On Fri, Oct 14, 2011 at 10:29 AM, Piotr Esden-Tempski <address@hidden> wrote:

It is great to hear that SAT works for it. I did not get around to try it yet. (got the board just yesterday)

What are you using to flash the chip?

Cheers Esden

On Oct 14, 2011, at 1:12 AM, Hector Garcia de Marina wrote:

> Hello Piotr,
>
> already I am using g++ 4.6.1 (built with summon-arm-toolchain script, https://github.com/esden/summon-arm-toolchain). Employing FreeRTOS and Eigen for matrices.
>
> I agree with you, inspecting the asm code for my IIR filter, I found that currently the compiler is not so "smart", actually sometimes it does not use the MAC instructions (DSP). I guess it is a matter of time that "cortex-m4" option will use better this kind of instructions. On the other hand, all float operation units uses correctly the new hardware instructions.
>
> Héctor.
>
> On Fri, Oct 14, 2011 at 10:03 AM, Piotr Esden-Tempski <address@hidden> wrote:
> Hi,
>
> On Oct 14, 2011, at 12:34 AM, Prof. Dr.-Ing. Heinrich Warmers wrote:
>
> > Hi all,
> > i found a first prototype pcb with the new ARM Cortex-M4.
> > http://www.watterott.com/de/Boards-/-Kits/ARM/Cortex-M4
> > This processor has a FPU,  168MHz clock, 1Mbyte flash eprom and 198kyte ram.
> > The price is 14 euro.
> > I think this processor allow DGPS and IMU fusion and may bee a candidate for the future  autopilot hardware.
> I have this board on my desk. You can get them for free from ST if you are in the US. As I am working on lisa/m v1.1 l added forward compatibility to this chip.
>
> The problem I see here is that the toolchains are in very early stages in supporting this new core, so it will take a while until they are stable enough to be used on production systems. But I am looking forward to that.
>
> Cheers Esden
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
>
> --
> Héctor
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

--
Héctor