Your KILL switch are ON.
Look ate radio config file and change the KILL channel if necessary.
> Date: Tue, 3 Jan 2012 19:14:20 +0100
> From: address@hidden
> To: address@hidden
> Subject: [Paparazzi-devel] Startup issue with Lisa/M
> Hi everyone and a happy new year!
> I'm currently trying to get a Lisa/m to run. Everything is fine so
> I managed to get it to run, also with my PPM-RC. But now I have a
> problem: I can't get the motors to run (not really the motors , I
> none attached, I'm just watching the throttle gauge in the GCS and
> it should show something different than 0%, once the motors run).
> I tried the usual startup-sequence, holding down the throttle and
> yaw to max. The problem I see is that "kill_throttle" is "Kill"
> I set it to resurrect, it switches to kill again after approx 30
> Currently I don't have a GPS attached, so I have no fix. Could
> the problem? Looking at the code it seems unlikely.
> I guess this is a noobish question, but every help would be
> Paparazzi-devel mailing list