[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Paparazzi-devel] Strange issue with Booz IMU v1.01 and the latest Git c
From: |
David Conger |
Subject: |
[Paparazzi-devel] Strange issue with Booz IMU v1.01 and the latest Git code |
Date: |
Sun, 18 Mar 2012 15:46:39 -0700 |
Hi Everyone,
I see a new strange issue with the Git code that does not exist with the SVN
code (paparazzi3).
When I use "RAW" messages the single-axis MAG does not report anything using
the latest dev and main branches from GIt.
However if I use paparazzi3 branch all is fine.
Anything I should try? To debug where the single axis sensor is failing to
register on SPI or ?
Hardware:
Booz IMU v1.01 (airframe file I use: b2_v1.1)
Booz Main (airframe is identical to conf/airframes/Poine/booz2_a1.xml except I
modify b2_v1.0 to b2_v1.1)
Communication is via FTDI adapter and USB/Serial 57k
I've used Linux and Mac OSX versions of Paparazzi. Actually for the paparazzi3
branch testing I'm on Ubuntu. But I have used the Git on Ubuntu with the latest
master and see the issue there.
Best regards,
David Conger