Re: [Paparazzi-devel] Current Sensor

[Romney, Jefferson S]

I got it to read one value off of the adc at startup, but it doesn't update. 
the value in adc_generic does update though. adding <define name="USE_ADC_6" 
doesn't seem to change anything.
I use an Attopilot current sensor from sparkfun.com.
________________________________________
From: address@hidden address@hidden on behalf of Eduardo lavratti address@hidden
Sent: Wednesday, May 16, 2012 11:55 AM
To: Paparazzi developer forum
Subject: Re: [Paparazzi-devel] Current Sensor

You need put

USE_ADC_6 in your airframe file

________________________________
From: address@hidden
To: address@hidden
Date: Wed, 16 May 2012 17:42:05 +0000
Subject: Re: [Paparazzi-devel] Current Sensor

Romney, i am very interested in put current sensor in my planes.
What sensor you used ?
may be i can help you with code and configurations

> From: address@hidden
> To: address@hidden
> Date: Wed, 16 May 2012 17:34:55 +0000
> Subject: [Paparazzi-devel] Current Sensor
>
> I just put a current sensor in my Plane with my Yapa, I can read it correctly 
> with the adc_generic module, but the current reading in the BAT or Energy 
> messages do not change. This is the part of my airframe file I have:
>
> <section name="BAT">
> <define name="ADC_CHANNEL_CURRENT" value="ADC_6" />
> <define name="MilliAmpereOfAdc(adc)" value="(36.6*adc)"/>
> </section>
>
> Is there anything else I need to add to this to get it working?
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________ Paparazzi-devel mailing list 
address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel