[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] YAPA2 help needed

From: Chris
Subject: [Paparazzi-devel] YAPA2 help needed
Date: Thu, 09 Aug 2012 18:01:24 +0300
User-agent: Mozilla/5.0 (X11; Linux i686; rv:14.0) Gecko/20120714 Thunderbird/14.0

Well i am very disappointed.
I managed to burn a second YAPA2 and i am sure that i did nothing wrong.
It exhibits exactly the same symptoms as the first one but with more symptoms this time
I2C and modem stopped communicating also.
I don't know what is going on anymore.
The 30 to 12v and 5V power supplies are brand new (not the same as in the first incident),
onboard regulators also work fine.
The AP works for some minutes and then it starts to fall apart slowly.
My setup in brief:
LIPO 6S (for now) ->|--> 12V PSU -> YAPA2 Vin
|-> 5v psu -> YAPA2 servo pins so other servos can get 5v
                                | -> CURRENT SENSOR ---|--> ESC -> MOTOR
    |--> ADC_1 for voltage and ADC_2 for current

reply via email to

[Prev in Thread] Current Thread [Next in Thread]